Skip to Content
Filters
Temperature and humidity outdoor, indoor probe with 4-20mA output
Out of stock
227.00 €
Ambient temperature, relative humidity transmitter. Weather sensor for environment monitoring. Outdoor, indoor use.
Built-in relative humidity, temperature sensors. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

TEMPERATURE SENSOR
Measuring range -30 to +80 °C
Accuracy ±0.4 °C
Resolution 0.1 °C
HUMIDITY SENSOR
Measuring range 0 to 100 % RH
Accuracy ±2.5 % RH from 5 to 95 % at 23 °C
Resolution 0.1% RH

Operating temperature -30 to +80 °C
Channels internal temperature and humidity sensor
Counted values dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Output 4-20 mA, galvanic isolated
Range of humidity sensor temperature compensation all temperature range
Configuration of output user adjustable from PC; measured range + value
Power 9-30 Vdc
Protection class IP65 electronics; IP40 sensors
Dimensions 88,5 x 170 x 39,5 mm; stem length 75 mm
Weight approx. 150 g
Warranty 3 years
Controllers
RSIO-L5-6SI2SO-C, RSio Series Remote Safe I/O: CIP Safety. 6 Configurable Safety Inputs w/ISD. 2 OSSD Safety Outputs. L-Code Power: 19.2-28.8 V dc. IP65, IP67.
Out of stock
1,359.00 €

Remote safe I/O block for CIP Safety over EtherNet/IP. Connects up to 6 safety devices with In-Series Diagnostics (ISD) and controls 2 OSSD outputs. Power connection via M12 L-code 5-pin connector. Rated PL e / Category 4 / SIL 3.

Suitable for e-stops, safety gates, light curtains, two-hand controls, and muting applications. Non-safe PNP outputs allow standard device connection on the same block. Configures and monitors via the network - no LCD required.

  • 6 configurable safety inputs with ISD
  • 2 independently controlled OSSD outputs
  • EtherNet/IP / CIP Safety
  • Power: M12 L-code, 24 V dc
  • IP65 / IP67, -25...+70 °C
Controllers
RSIO-MA4-6SI2SO-C, RSio Series Remote Safe I/O: CIP Safety. 6 Configurable Safety Inputs w/ISD. 2 OSSD Safety Outputs. 7/8 Power: 19.2-28.8 V dc. IP65, IP67
Out of stock
1,359.00 €

Remote safe I/O block for CIP Safety over EtherNet/IP. Connects up to 6 safety devices with In-Series Diagnostics (ISD) and controls 2 OSSD outputs. Power connection via 7/8" Mini 4-pin connector - compatible with existing DeviceNet-style power trunk cabling. Rated PL e / Category 4 / SIL 3.

Suitable for e-stops, safety gates, light curtains, two-hand controls, and muting applications. Non-safe PNP outputs allow standard device connection on the same block. Configures and monitors via the network - no LCD required.

  • 6 configurable safety inputs with ISD
  • 2 independently controlled OSSD outputs
  • EtherNet/IP / CIP Safety
  • Power: 7/8" Mini, 24 V dc
  • IP65 / IP67, -25...+70 °C
Showing 2883 of 2883 results