UWT NivoRadar NR 7200 is an 80 GHz FMCW radar level sensor for continuous, non-contact measurement of liquids up to 15 m. The narrow 8° beam avoids reflections from tank walls and internal fittings, and only the PVDF antenna is in contact with the medium.

• Warranty: extended to 6 years
• Measuring range: 0...15 m, accuracy ±2 mm
• Output: 2-wire 4...20 mA with HART
• Supply: 15...35 V DC, loop-powered
• Housing: PBT, G 1 1/2" thread (DIN ISO 228-1), PVDF wetted parts
• Environment: IP66/IP67, process temperature -40...+80 °C, pressure -1...+3 bar
• Connection: M20x1.5 cable gland
• Setup: display with push buttons under a transparent lid, or UWT LevelApp via Bluetooth

Used for level in storage and process tanks, IBCs and wastewater sumps, including many acids. Measures liquids with a dielectric constant from 1.1 - oils and solvents as well as water-based media.

CE, UKCA and cFMus approved for general-purpose (non-Ex) areas.

RKC4T-2-RSC4T/TXL is a TURCK extension cable with a straight M12 female connector on one end and a straight M12 male connector on the other (3-pin). The PUR jacket is rated for moving installation, including drag chains.

• Connectors: M12 x 1 female and M12 x 1 male, both straight, A-coded, 3-pin, gold-plated brass (CuZn) contacts
• Cable: 2 m, PUR, black, Ø 4.1 mm, 3 x 0.34 mm², core colours BN, BU, BK
• Ratings: 4 A, 250 V, more than 100 mating cycles
• Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
• Environment: IP67, IP69K (only when screwed in); -50...+80°C fixed, -25...+80°C mobile, -25...+60°C in a drag chain
• Drag chain: at least 5 million bending cycles, up to 3.3 m/s and 5 m/s², bending radius ≥10 x Ø, torsion ±180°/m

The jacket resists chemicals, UV radiation, oils, welding sparks and abrasion, is flame retardant (FT2 per UL 1581, IEC 60332-2-2) and free from halogen, silicone, PVC and LABS. Approval: cULus.

OT200.DN-GLZZJ.72CV is a distance sensor from the Baumer OT200 series, measuring by time of flight over a 0...2000 mm range. It reports the measured distance over IO-Link and at the same time switches two freely set switching points.

• Measuring range: 0...2000 mm (Sd), repeat accuracy ≤ 1.25...1.5 mm
• Output: push-pull (PNP/NPN) and IO-Link V1.1.4, Class A
• Linearity error: ± 10 mm
• Supply: 10...30 V DC, consumption max. 55 mA
• Housing: plastic (ASA, PMMA), 8 x 25.1 x 15.8 mm, smooth stainless steel mounting sleeve
• Environment: IP 67, -25...+50 °C
• Connection: 2 m cable, 4 cores

The infrared laser diode (940 nm, laser class 1) also works in dusty and smoky environments, while a visible red Alignment Guide beam is used for alignment. Response time is selected over IO-Link: < 25 ms in High Speed, < 50 ms in Standard and < 200 ms in High Accuracy mode. Suppression of reciprocal influence allows several sensors to be mounted side by side.

Vibration and shock resistance tested to IEC 60068-2-6:2008 (10 g, 10...2000 Hz) and IEC 60068-2-27:2009 (50 g / 11 ms).

OT200.GN-GLZZJ.72CV is a background suppression photo sensor from the Baumer OT200 series, measuring by time of flight over a 0...2000 mm switching range. It measures distance directly instead of judging the amount of reflected light, so dark and shiny objects are detected at the same point. The measured distance value is additionally available over IO-Link.

• Switching range: 0...2000 mm (Tw), set by qTeach or IO-Link
• Output: push-pull (PNP/NPN) and IO-Link V1.1.4, Class A, Light operate, switchable
• Repeat accuracy: ≤ 1.25...1.5 mm
• Supply: 10...30 V DC, consumption typically 25 mA (24 V DC)
• Housing: plastic (ASA, PMMA), 8 x 25.1 x 15.8 mm, smooth stainless steel mounting sleeve
• Environment: IP 67, -25...+50 °C
• Connection: 2 m PVC cable, 4 x 0.08 mm²

The infrared laser diode (940 nm, laser class 1) also works in dusty and smoky environments, while a visible red Alignment Guide beam is used for alignment. qTeach setup needs no button, so the switching point cannot be changed by accident during production. Suppression of reciprocal influence allows several sensors to be mounted side by side.

Vibration and shock resistance tested to IEC 60068-2-6:2008 (10 g, 10...2000 Hz) and IEC 60068-2-27:2009 (50 g / 11 ms).

OT200.SN-GDZZJ.72CV is a SmartReflect light barrier from the Baumer OT200 series - it forms the beam between the sensor and a fixed background instead of a separate reflector. The background position Sde is set anywhere between 300 and 2000 mm, and an object is detected as soon as it enters the beam ahead of the background. The measured distance value is additionally available over IO-Link.

• Background position: 300...2000 mm (Sde), scanning range 90...94 % Sde
• Output: push-pull (PNP/NPN) and IO-Link V1.1.4, Class A, Light operate, switchable
• Output current: 100 mA
• Supply: 10...30 V DC, consumption typically 25 mA (24 V DC)
• Housing: plastic (ASA, PMMA), 8 x 25.1 x 15.8 mm, smooth stainless steel mounting sleeve
• Environment: IP 67, -25...+50 °C
• Connection: 2 m PVC cable, 4 x 0.08 mm²

The reflector-free barrier principle suits positions where a reflector has nowhere to mount or soils quickly - the conveyor belt, machine frame or wall serves as the background. The infrared laser diode (940 nm, laser class 1) also works in dusty and smoky environments, while a visible red Alignment Guide beam is used for alignment.

Vibration and shock resistance tested to IEC 60068-2-6:2008 (10 g, 10...2000 Hz) and IEC 60068-2-27:2009 (50 g / 11 ms).

Reliable, Cost-Efficient Sensing for Challenging Environments Range 5.0 m; 40x30 degree FOV
Input: 10-30 V dc; Output: 1 PNP/NPN with IO-Link Communication; 1 PNP/NPN
5-pin M12 Integral QD
Ideal for outdoor applications • Resistant to rain, snow, fog, steam, wind, or sunlight • IP67-rated
Ideal for challenging indoor applications • Immune to dust, dirt, and steam • Superior performance to ultrasonics for level measurement applications in any environment
Temperature stability • Minimal temperature effect for stable measurement in a wide range of temperatures • -40 to 60 °C operating temperature

OT330.GN-GLZZJ.72OV/0030 is a background suppression photo sensor from the Baumer OT330 series in a miniature housing, measuring by time of flight over a 0...2500 mm switching range. Distance is measured directly, so a black and a white object are detected at the same point (black/white shift 0 %). The measured distance value is available over IO-Link.

• Switching range: 0...2500 mm (Tw), set by qTeach or IO-Link
• Output: push-pull (PNP/NPN) and IO-Link V1.1.4, Class A, Light operate
• Output current: 100 mA, repeat accuracy < 2...1.5 mm
• Supply: 10...30 V DC, consumption typically 25 mA (24 V DC)
• Housing: plastic (ABS, ASA, PMMA), 11 x 32 x 21 mm, smooth brass mounting sleeve
• Environment: IP 67, -25...+55 °C
• Connection: M12 flylead connector, 300 mm

The infrared laser diode (940 nm, laser class 1) also works in dusty and smoky environments, while a visible red Alignment Guide beam is used for alignment. Response time is selected over IO-Link: < 25 ms in High Speed, < 50 ms in Standard and < 200 ms in High Accuracy mode. Suppression of reciprocal influence allows several sensors to be mounted side by side.

Vibration and shock resistance tested to IEC 60068-2-6:2008 (10 g, 10...2000 Hz) and IEC 60068-2-27:2009 (50 g / 11 ms resp. 100 g / 6 ms).