Skip to Content
Filters
Gas sensors
Gas detector CH4, 11...30VDC, 2x4-20mA/0-10V, RS485
Out of stock
228.70 €

Power supply: 11...30 VDC Range 0...100% LEL (0...5 %vol) CH4 Resolution 0,1 %LEL (50 ppm) CH4 Default alarm set-points 20 / 50 %LEL 2 × 4-20 mA / 0-10 V, RS485

Level sensors
Radar sensor NR3300, DN100 SS flange, 4-20 mA HART, with display
Out of stock
3,483.00 €
Process Temperature / Seal / Material: -40...+150°C, FKM (SHS FPM 70C3 GLT), 
PEEK Second Line of Defense: Without (Single line of defense) 
Electronic Module: 2-wire 4..20 mA, HART Process Connection: Swivelling holder for bulk solids suitable for flange EN1092-1, DN100 PN16, flat face, Form A / 316/316L 
Housing / Enclosure: Aluminium single chamber / IP66/IP68 (0.2 bar) 
Cable Entry: 1x M20x1.5 screwed cable gland PA black (ø5-9 mm [0.20-0.35"]), 
Standard, 1x blind plug 
Plug on Display: Plug on Display NivoPlug Additional 
Equipment: With rinsing connection
Max range: 120m
Level sensors
Level sensor, vibrating fork VN7120, G1/2" ISO 228-1, 3/4 wire IO-Link, PNP, NPN, Push/Pull, SS316L, Tmax 100°C, Sp=64mm
In stock: 6 pcs
187.00 €
Temperature Extended Shaft: Without, Tprocess max. 100°C (212°F) Enclosure: Ø35mm, 1.4404 (316L), Lid PC, IP67, Type 4X, M12-plug Electronic Module: 3/4-wire IO-Link, PNP, NPN, Push/Pull (IO-Link certificate not yet available) Process Connection: Thread G 1/2" ISO 228-1 Material of Process / Extension: Stainless steel 1.4404 (316L), Ra
Level sensors
Level sensor, vibrating fork VN7120, G1/2 "ISO 228-1, 3/4-wire IO-Link, PNP, NPN, Push/Pull, SS316L, Tmax 150°C, Sp=64mm
In stock: 2 pcs
210.00 €
Temperature Extended Shaft: With, Tprocess max. 150°C (302°F) Enclosure: Ø35mm, 1.4404 (316L), Lid PC, IP67, Type 4X, M12-plug Electronic Module: 3/4-wire IO-Link, PNP, NPN, Push/Pull (IO-Link certificate not yet available) Process Connection: Thread G 1/2" ISO 228-1 Material of Process / Extension: Stainless steel 1.4404 (316L), Ra
Level sensors
Level sensor, vibrating fork VN7120, G1/2 "ISO 228-1, 3/4-wire IO-Link, PNP, NPN, Push/Pull, SS316L, Tmax 150°C, Sp=104mm
In stock: 4 pcs
229.00 €
Temperature Extended Shaft: With, Tprocess max. 150°C (302°F) Enclosure: Ø35mm, 1.4404 (316L), Lid PC, IP67, Type 4X, M12-plug Electronic Module: 3/4-wire IO-Link, PNP, NPN, Push/Pull (IO-Link certificate not yet available) Process Connection: Thread G 1/2" ISO 228-1 Material of Process / Extension: Stainless steel 1.4404 (316L), Ra
Inductive sensors
Inductive sensors BI8-M18-LIU
Out of stock
184.90 €
Sn = 8 mm, M18×1 metal thread (chrome-plated brass), flush, with 2 m cable connection, 15–30V DC, analog output 0–10V and 0–20 mA, IP67
Level sensors
Level sensor, vibrating fork VN7120, 20-230V AC/DC, G 1/2", L = 104 mm
Out of stock
320.00 €
Temperature Extended Shaft: With, Tprocess max. 150°C (302°F) Enclosure: Ø35mm 1.4404 (316L), Lid PC, IP67, Type 4X, Valve-plug ISO4400 M16 (Valve mating plug implemented, IP67) Electronic Module: 2-wire without contact, 20…230V AC/DC Process Connection: Thread G 1/2" ISO 228-1 Material of Process Connection / Extension: Stainless steel 1.4404 (316L), Ra
HMI
Touch display TX107-00VPST, 7", TX VisuPro runtime, resistive, IP66 front
Out of stock
587.00 €

TX107-00VPST is a 7" touch display from the TURCK TX100 series with TX VisuPro runtime, a plastic housing and a resistive touchscreen behind a plastic front film. It works as an operator panel only and has no built-in PLC.

  • Display: 7" TFT, 800 x 480 (WVGA), 16:9, 64K colours, 200 cd/m², resistive, dimmable
  • Communication: 1 x RJ45 Ethernet 10/100 Mbit, 1 x RS232/RS485/RS422, 1 x USB host
  • Software: TX VisuPro runtime; ARM Cortex A8, 1 GHz, 512 MB RAM, 4 GB Flash
  • Supply: 24 VDC (10...32 VDC), max. 0.3 A
  • Housing: plastic, front 187 x 147 x 34 mm, cut-out 176 x 136 mm, mounting depth 29+5 mm
  • Environment: IP66 front, IP20 rear, NEMA 2/4X; 0...+50 °C, 5...85 % RH non-condensing

Built into a cabinet door or control desk. Mounting brackets and the power connector come in the TX100 mounting kit, available as an accessory. There are no expansion slots.

Approvals: Haz. Loc. Class I, Division 2, Groups A, B, C and D.

Inductive sensors
Inductive sensor IE5343
Out of stock
60.60 €

Sn = 3 mm, M8×1 metal thread (nickel-plated brass), flush, short barrel, with cable connection (3 m), 10–30V DC, PNP NO (operable as 2-wire PNP/NPN NO), IP67

Inductive sensors
Inductive sensor NI6U-EG08-AP6X
Out of stock
80.10 €
Sn = 6 mm, M8×1 metal thread (stainless steel 1.4427, Factor 1 for all metals), non-flush, with 2 m cable connection, 10–30V DC, PNP NO, Uprox+® technology, resistant to magnetic fields, IP68
Level sensors
Level sensor LMP307T, 0-12 m H2O, 4-20 mA, 0...70°C, 13 m PUR cable
Out of stock
577.00 €
LMP 307T is a stainless steel submersible probe for continuous level and temperature measurement in water and clean to lightly soiled liquids. It records both variables simultaneously with separate, independent signal processing, reducing wiring and maintenance effort. In addition to the standard level output, a separate 4…20 mA, 2-wire analogue output is provided for temperature. Typical applications include drinking water treatment, monitoring of stormwater basins and rivers, as well as level measurement in tanks and container farms.
Pressure sensors
Pressure sensor DMP331, 0...0.6 bar, 4-20 mA Ex ia, G 1/2" DIN 3852, flush, Temperature compensation -20…+50 °C
Out of stock
371.30 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Connection Cables
Connection cable RKSV8T-25/TEG1023, M12, female, straight, 8-pin, 25m, shielded
Out of stock
106.00 €

RKSV8T-25/TEG1023 is a TURCK shielded connection cable with a straight M12 female connector (8-pin) on one end and open cores on the other. The cable shield is connected to the coupling nut.

  • Connector: M12 x 1, female, straight, A-coded, 8-pin, gold-plated brass (CuZn) contacts
  • Cable: 25 m, grey (RAL 7035), Ø 6.4 mm, 8 x 0.25 mm², core colours BN, WH, BU, BK, GY, PK, VT, OG
  • Shield: aluminium foil and tinned copper wire
  • Ratings: 2 A, 30 V, more than 100 mating cycles
  • Housing: TPU, grey, stainless steel (V4A) coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -40...+105°C fixed, -40...+80°C mobile

The cable jacket resists chemicals, oils, acids, alkaline solutions, microbes and hydrolysis, is flame retardant and free from LABS.

Approval: cULus.

Inductive sensors
Inductive sensor BI1-EG05-AP6X-V1331
Out of stock
93.60 €
Sn = 1 mm, M5×0.5 metal thread (stainless steel 1.4305 / AISI 303), flush, with connector M8, 10–30V DC, PNP NO
Connection Cables
Connection cable WKC4.4T-30/TEL, M12, female, angled, 4-pin, 30m PVC
Out of stock
53.10 €

WKC4.4T-30/TEL is a TURCK connection cable with an angled M12 female connector (4-pin) on one end and open cores on the other.

  • Connector: M12 x 1, female, angled, A-coded, 4-pin, gold-plated brass (CuZn) contacts
  • Cable: 30 m, PVC, black, Ø 4.6 mm, 4 x 0.34 mm², core colours BN, WH, BU, BK
  • Ratings: 4 A, 250 V, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -40...+105°C fixed, -5...+80°C mobile

The PVC jacket resists chemicals, oils, acids, alkaline solutions, microbes and hydrolysis, is flame retardant and free from LABS. Approval: cULus.

Connection Cables
Connection cable WKC4.4T-25/TXL, M12, female, angled, 4-pin, 25m PUR
Out of stock
43.20 €

WKC4.4T-25/TXL is a TURCK connection cable with an angled M12 female connector (4-pin) on one end and open cores on the other.

  • Connector: M12 x 1, female, angled, A-coded, 4-pin, gold-plated brass (CuZn) contacts
  • Cable: 25 m, PUR, black, Ø 4.5 mm, 4 x 0.34 mm², core colours BN, WH, BU, BK
  • Ratings: 4 A, 250 V, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -50...+80°C fixed, -25...+80°C mobile, -25...+60°C in a drag chain
  • Drag chain: at least 5 million bending cycles, up to 3.3 m/s and 5 m/s², bending radius ≥10 x Ø, torsion ±180°/m

The PUR jacket resists chemicals, UV radiation, oils, welding sparks and abrasion, is flame retardant (FT2 per UL 1581, IEC 60332-2-2) and free from halogen, silicone, PVC and LABS. Approval: cULus.

Controllers
Timer/counter TC42HLRRVJ, contact/NPN/PNP inputs, 2 relay outputs SPDT, 100-240VAC/VDC
In stock: 2 pcs
134.90 €

TC42HLRRVJ is an Ascon Tecnologic TC42 timer, counter and power limiter in a 48 x 48 mm (1/16 DIN) case with a white and orange dual display. The CNT (count enable) and RST (reset) inputs take volt-free contacts or NPN/PNP signals. This version is set up from the keyboard: it has no NFC programming, internal buzzer or battery.

  • Inputs: 2 digital inputs (CNT, RST) for volt-free contacts or NPN/PNP logic
  • Outputs: OUT1 and OUT2 relay SPDT 8 A resistive, 1/2 HP 250 V, 100 000 operations
  • Timer: 4 scales - 9999 h, 99 h 59 min, 99 min 59 s, 99.99 s; accuracy ±0.1% fs
  • Counter: up to 9999, counting frequency up to 200 Hz
  • Supply: 100...240 Vac/Vdc ±10%, approx. 3 VA
  • Case: 48 x 48 mm, depth 62.3 mm, panel cut-out 45 x 45 mm, screw terminals 0.2...2.5 mm²; IP65 front with gasket, 0...50 °C

Conforms to low voltage directive 2014/35/EU (EN 60730-1, EN 60730-2-7, EN 61812-1, UL 508) and EMC directive 2014/30/EU (EN 55011 class B).

Controllers
Timer/counter TC42LLRRVJ, contact/NPN/PNP inputs, 2 relay outputs SPDT, 24VAC/VDC
Out of stock
134.90 €

TC42LLRRVJ is an Ascon Tecnologic TC42 timer, counter and power limiter in a 48 x 48 mm (1/16 DIN) case with a white and orange dual display. The CNT (count enable) and RST (reset) inputs take volt-free contacts or NPN/PNP signals. This version is set up from the keyboard: it has no NFC programming, internal buzzer or battery.

  • Inputs: 2 digital inputs (CNT, RST) for volt-free contacts or NPN/PNP logic
  • Outputs: OUT1 and OUT2 relay SPDT 8 A resistive, 1/2 HP 250 V, 100 000 operations
  • Timer: 4 scales - 9999 h, 99 h 59 min, 99 min 59 s, 99.99 s; accuracy ±0.1% fs
  • Counter: up to 9999, counting frequency up to 200 Hz
  • Supply: 24 Vac/Vdc ±10%, approx. 3 VA
  • Case: 48 x 48 mm, depth 62.3 mm, panel cut-out 45 x 45 mm, screw terminals 0.2...2.5 mm²; IP65 front with gasket, 0...50 °C

Conforms to low voltage directive 2014/35/EU (EN 60730-1, EN 60730-2-7, EN 61812-1, UL 508) and EMC directive 2014/30/EU (EN 55011 class B).

Sensors
Leakage detector, 4 channel, customer Resistance defined, IP67, with U.FL antenna, NB-IoT
Out of stock
270.00 €

XX4CHXX-5905309602250 Efento HC5 NB-IoT Leakage detector/customer Resistance defined, IP67 sensor with U.FL antenna, 4 channel

Parcelbox
Parcel box, private, code or app open/close, BLE
In stock: 3 pcs
380.00 €

The secure, connected mailbox that lets you receive and return all your parcels and letters, even when you're not available.

Parcelbox
Parcelbox suitable for bigger parcels, app or code open/close, BLE
In stock: 4 pcs
1,073.00 €

The automatic parcel locker dedicated to receiving even the largest everyday parcels for private or professional customers.

Magnetinductive
Magnetinductive sensor BIM-UNTK-AP7X
Out of stock
47.10 €

For T-groove cylinders 

Pressure sensors
Pressure sensor DMP331, 0...2.5 bar, 4-20 mA Ex ia, G 1/2" DIN 3852
Out of stock
307.50 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Temperature sensors
Thermocouple K, 15x600mm, drilled thermowell, heat resistive SS310, IP67, max +1200°C
In stock: 8 pcs
170.00 €
Size: 15x600 mm
Type: Type K
Maximum Temperature: +1200°C
Pressure sensors
Pressure sensor PBMN-24B22RA14471212000, 0...10 bar, 4-20mA, G 1/2" flush, DIN 43650 A
Out of stock
759.80 €

PBMN-24B22RA14471212000 is a Baumer PBMN series relative pressure sensor with a flush membrane, a 0...10 bar measuring range and a 4...20 mA two-wire output. The cooling neck allows permanent operation at process temperatures up to 200 °C.

  • Accuracy: max. measuring error ±0.25 % FSR, including zero-point and span error, non-linearity and hysteresis (EN 61298-2); long-term stability ≤ 0.1 % FSR per year
  • Measuring range: 0...10 bar, relative pressure; temperature coefficient ≤ 0.03 % FSR/10 K (zero point and span), compensated range -40...+85 °C
  • Output: 4...20 mA, 2-wire, response time ≤ 5 ms; zero point and span adjustable with FlexProgrammer 9701
  • Supply: 8...30 V DC
  • Protection: short-circuit protected
  • Housing: AISI 316L (1.4404); process connection G 1/2 A DIN EN ISO 1179-2 (3852-E) with cooling neck, AISI 316L (1.4404); membrane AISI 316L (1.4435), Ra ≤ 0.4 µm; NBR gasket; NSF H1 oil filling
  • Environment: IP65; ambient temperature -40...+85 °C; process temperature -40...+200 °C
  • Connection: DIN EN 175301-803 A (DIN 43650 A) connector, 4-pin

Suited to pressure measurement in high-temperature processes, including permanent SIP/CIP cycles up to 200 °C. The oil filling is NSF H1 listed (FDA approved), so it can be used on food production equipment.

EMC to EN 61000-6-3. Shock to EN 60068-2-27 (50 g / 11 ms, 100 g / 6 ms), vibration to EN 60068-2-6 (1.5 mm p-p 10...58 Hz, 10 g 58 Hz...2 kHz).

Pressure sensors
Pressure sensor 17.600G, 0...300 bar, 4-20 mA, G 1/4" EN 837
Out of stock
157.00 €
The 17.600 G is a welded stainless steel OEM pressure transmitter designed for demanding mobile hydraulics and industrial applications. It is suitable for mechanical and plant engineering, refrigeration technology, medical technology, and utility vehicles. Thanks to its robust design and high media compatibility, it can be used with fuels, oils, and oxygen.
Gas sensors
CO2 concentration thermometer hygrometer with RS485 interface, duct mount
Out of stock
460.00 €

Duct mount CO2 concentration t-line WebSensor.

Transmitter with built-in concentration CO2, temperature, relative humidity sensor for duct mount.

A multiple point CO2 and temperature adjustment procedure leads to excellent CO2 measurement accuracy over the entire temperature working range; this is a must for process control and outdoor applications. The dual wavelength NDIR CO2 sensing procedure compensates automatically for ageing effects. The CO2 module is highly resistant to pollution and offers maintenance free operation and outstanding long term stability.

Green LED shines - CO2 concentration 0 to 1000 ppm

Yellow LED shines - CO2 concentration 1001 to 1200 ppm

Red LED shines - CO2 concentration 1201 ppm and more

 

Extended measuring range available for an additional charge

  • Measuring range: 0 to 10 000 ppm
  • Accuracy: 100 ppm + 5% of the measured value at 25 °C and 1013 hPa
Connection Cables
Connection cable RKC5T-10/TXL, M12, female, straight, 4-pin + PE, 10m PUR
Out of stock
24.40 €

RKC5T-10/TXL is a TURCK connection cable with a straight M12 female connector (4-pin + PE) on one end and open cores on the other. Pin 5 is the protective earth (PE). The PUR jacket is rated for moving installation, including drag chains.

  • Connector: M12 x 1, female, straight, A-coded, 4-pin + PE, gold-plated brass (CuZn) contacts
  • Cable: 10 m, PUR, black, Ø 4.8 mm, 5 x 0.34 mm², core colours BN, WH, BU, BK, GNYE
  • Ratings: 4 A, 60 V, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -50...+80°C fixed, -25...+80°C mobile, -25...+60°C in a drag chain
  • Drag chain: at least 5 million bending cycles, up to 3.3 m/s and 5 m/s², bending radius ≥10 x Ø, torsion ±180°/m

The jacket resists chemicals, UV radiation, oils, welding sparks and abrasion, is flame retardant (FT2 per UL 1581, IEC 60332-2-2) and free from halogen, silicone, PVC and LABS. Approval: cULus.

Relays and converters
Contactor 230V50HZ/240V60HZ
Out of stock
43.00 €

Kontaktors DILM15-01-230AC-E EATON Piegāde 1 nedēļa

Relays and converters
Contactor DILEM-10 (230VAC) (XTMC6A10) EATON
Out of stock
45.00 €

Kontaktors DILEM-10 (230VAC) (XTMC6A10) EATON Piegāde 1 nedēļa

Control and regulation
PKZM0-6,3 motor-protective circuit-breaker, 4...6,3A, with rotary handle
Out of stock
55.56 €

Motora aizsardzība PKZM0-6.3 Eaton Piegāde 1 nedēļa

Control and regulation
PKZM0-1,6 motor-protective circuit-breaker, 1...1,6A, with rotary handle
Out of stock
61.00 €

Motora aizsardzība PKZM0-1.6 Eaton Piegāde 1 nedēļa

Pressure sensors
Pressure sensor DMP331, 0...16 bar, SIL2, 4-20 mA Ex ia, 1/4" NPT, M12 connector, 4-pin
Out of stock
362.70 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Pressure sensors
Pressure sensor DMP331, -0.5...2.5 bar, 4-20 mA, G 1/2" DIN 3852
Out of stock
305.00 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Inductive sensors
Inductive sensor BI50U-Q80-VP4X2-H1141
Out of stock
177.90 €
Sn = 50 mm, Q80 rectangular housing (92×80×40 mm, plastic PBT-GF30-V0, Factor 1 for all metals), flush, with connector M12, 10–65V DC, PNP NO/NC (changeover), Uprox® technology, resistant to magnetic fields, extended switching distance, IP68
Inductive sensors
Inductive sensor BI8U-EM18WD-AP6X-H1141
Out of stock
95.90 €
Sn = 8 mm, M18×1 metal thread (stainless steel 1.4404 / AISI 316L, Factor 1 for all metals), flush, extended barrel, with connector M12, 10–30V DC, PNP NO, Uprox+® technology, resistant to magnetic fields, pressure resistant, wash down, IP68/IP69K, -40…+100 °C
Showing 2160 of 2920 results
Load more