SMB30A is a Banner right-angle bracket for sensors with a 30 mm housing. The curved slot lets the sensor be turned before the screws are tightened.

• Sensor hole: Ø30.5 mm
• Mounting: M6 (¼") hardware, 40 mm hole centre spacing
• Material: 12-gauge stainless steel

SMB18A is a Banner right-angle bracket for sensors with an 18 mm thread. The curved slot lets the sensor be turned before the screws are tightened.

• Sensor hole: Ø18.5 mm
• Mounting: M4 (#8) hardware, 24.2 mm hole centre spacing
• Material: 12-gauge stainless steel

BRT-2X2 is a Banner square acrylic retroreflector for photo sensors working in retroreflective mode. Two slots let it be screwed on, and optional brackets are available.

• Reflector size: 51 x 51 mm
• Overall size: 51.3 x 61 mm
• Reflectivity factor: 1.0
• Mounting: 2 slots, Ø4.2 mm
• Temperature: max +50 °C

BRT-40X18A is a Banner rectangular acrylic retroreflector for photo sensors working in retroreflective mode. Its narrow 18 mm width suits mounting positions with little space.

• Reflector size: 18 x 40 mm
• Overall size: 18 x 60 x 8 mm
• Reflectivity factor: 1.0
• Mounting: 2 holes, Ø3.5 mm, 50 mm centres
• Temperature: -20...+60 °C

BRT-42A is a Banner round acrylic retroreflector on a base with two mounting holes, for photo sensors working in retroreflective mode.

• Reflector size: Ø42 mm
• Overall size: 60 x 42 mm
• Reflectivity factor: 1.0
• Mounting: 2 holes, Ø3.5 mm, 50 mm centres
• Temperature: -20...+60 °C

BRT-77X77C is a Banner square acrylic retroreflector for photo sensors working in retroreflective mode. It is fixed with two screws, and optional brackets are available.

• Reflector size: 77 x 77 mm
• Overall size: 84.5 x 84.5 x 9 mm
• Reflectivity factor: 2.0
• Mounting: 2 holes, Ø3.5 mm
• Temperature: -20...+60 °C

BRT-84 is a Banner round acrylic retroreflector with a centre mounting hole, for photo sensors working in retroreflective mode.

• Diameter: 84 mm
• Reflectivity factor: 1.4
• Mounting: centre hole, Ø4.5 mm
• Temperature: -20...+60 °C

BRT-92X92CB is a Banner square acrylic retroreflector on a black mounting base, for photo sensors working in retroreflective mode. It is fixed with two screws, and optional brackets are available.

• Reflector size: 92 x 92 mm
• Overall size: 100 x 100 x 9 mm
• Reflectivity factor: 3.0
• Mounting: 2 holes, Ø3.5 mm
• Temperature: max +50 °C

APC-18 is a Banner stainless steel collar that threads onto an 18 mm barrel sensor and blows clean air across the sensor face. The positive air pressure keeps water, dust and airborne dirt off the lens and also cools sensors exposed to ambient heat.

• Fits: 18 mm threaded barrel sensors (M18 x 1)
• Material: stainless steel
• Air connection: 1/8 x 10-32 stainless steel barb fitting for 1/8 in ID hose
• Air supply: 10 l/min at approx. 0.7 psi
• Size: Ø 34 mm, adds approx. 16 mm to the sensor length

The collar has both internal and external M18 thread, so the bracket can hold either the sensor or the collar. Use clean, dry instrument air and teach the sensor while the air is flowing. Not for ultrasonic sensors: the air flow changes the speed of sound and shifts the measurement.

SMBQ4XFAM12 is a Banner bracket kit that clamps onto a 12 mm rod and carries a Q4X, QS18 or QS30 sensor on its flat plate. The rod clamp turns the sensor around the rod axis before it is locked.

• Fits: Banner Q4X, QS18 and QS30 sensors
• Rod: Ø 12 mm (1/2 in) rod bracket systems
• Material: zinc die-cast (Zamak)
• Size: plate 43.5 x 41.3 mm, sensor fixed with M3 screws
• Included: 1 bracket with hardware pack; the socket head cap screw for the rod clamp is not included

SMBQ20LV is a Banner right-angle stainless steel bracket for mounting a Q20 sensor vertically from the back. The sensor can be tipped ±10° to align the beam after the bracket is fixed.

• Fits: Banner Q20 sensors
• Type: right-angle, vertical back mount, ±10° tilt
• Material: stainless steel
• Included: 1 bracket, no mounting hardware

BRT-60X40C is a Banner rectangular acrylic retroreflector for photo sensors working in retroreflective mode.

• Size: 40 x 60 mm
• Reflectivity factor: 1.4
• Temperature: -20...+60 °C

SMBQS12PD is a Banner right-angle bracket that holds the sensor by its threaded nose through a 13 mm hole.

• Sensor hole: Ø13.0 mm
• Mounting: Ø3.5 mm and 3.5 x 10.6 mm slot, 14.0 mm hole centre spacing
• Material: 16-gauge 300 series stainless steel

BRT-51X51BM is a Banner square acrylic retroreflector with micro-prism geometry, for photo sensors working in retroreflective mode. Two slots let it be screwed on, and optional brackets are available.

• Reflector size: 51 x 51 mm
• Overall size: 51 x 61 x 6.2 mm
• Reflectivity factor: 1.5
• Mounting: 2 slots, Ø4.6 mm
• Temperature: -20...+50 °C

PRO-KIT is a Banner kit for configuring Pro series lights and selected sensors from a PC with the Pro Editor software. It is needed for initial configuration only, not for the device's operation in the machine.

• Included: converter cable, splitter and power supply
• Software: Banner Pro Editor
• Fits: Banner Pro series lights and selected sensors

CE and UKCA compliant.

SMBQ5XFA is a Banner swivel bracket that fixes a sensor to the T-slot of an extruded aluminium profile. Tilt and pan adjustment lets the beam be aligned after the bracket is fixed.

• Fits: Banner Q5X, QM42, PD45, PD49, QC50
• Adjustment: tilt and pan
• Material: zinc die-cast (Zamak)
• Hardware: 3/8-16 x 4 in socket head cap screw included

Some sensors can also be side-mounted with the 3 mm screws supplied with the sensor.

SMB30MM is a Banner right-angle bracket for sensors with a 30 mm thread. Curved mounting slots let the sensor be turned before the screws are tightened.

• Sensor hole: Ø30.1 mm
• Mounting: M6 (¼") hardware, 42.6 x 7 mm slot and Ø6.4 mm hole
• Material: 12-gauge stainless steel

SMBZMXMP is a Banner stainless steel plate for flush mounting a sensor of the 3DTOF series. Besides the M4 holes for the sensor it carries a 1/4-20 thread, so the plate can also be fixed to an articulated (Bogen-type) arm.

• Fits: Banner 3DTOF series
• Material: stainless steel
• Hardware: M4 x 0.7 screws included
• Extra mounting: 1/4-20 thread

LMB30LP is a Banner low-profile flat bracket with a 30 mm mounting hole.

• Mounting hole: Ø30.5 mm
• Mounting: 2x Ø5.5 mm holes
• Dimensions: 65 x 50 mm
• Material: 300 series stainless steel

LMBS15SP is a Banner snap clip that holds a device in the S15 housing. It is fixed with the supplied thread-forming screws or with M5 or No. 10 hardware.

• Fits: Banner S15 housing
• Material: white polypropylene
• Mounting: clearance for M5 or No. 10 hardware
• Included: pack of 5, with thread-forming hardware

SMBAMS18RA is a right-angle bracket from the Banner SMBAMS series for barrel sensors with an 18 mm thread.

• Sensor hole: Ø19.0 mm, for 18 mm threaded sensors
• Material: 12-ga (2.6 mm) cold-rolled steel
• Adjustment: articulation slots, rotation beyond 90°
• Included: mounting hardware

PIRS1X326T5AL47 is a Banner plastic fibre-optic array for opposed-mode sensing: the 47 mm sensing end carries 32 fibre cores of Ø 0.25 mm side by side, so a small object anywhere along the array interrupts the light. The beam exits from the side of the flat sensing head.

• Array: 47 mm, 32 cores Ø 0.25 mm; side-view sensing head 55.2 x 20.2 x 8.7 mm
• Fibre: plastic, polyethylene jacket, length 2 m, T5 termination with stainless steel ferrule
• Bend radius: minimum 60 mm
• Temperature: -55...+70 °C

Supplied as a pair for emitter and receiver. The drawing states that it is not for use with D10 amplifiers; Banner gives a range of 438 mm with a DF-G1 amplifier.

SMBAMS30RA is a Banner SMBAMS series right-angle bracket for sensors with a 30 mm housing. Its slots let the sensor be turned through more than 90°.

• Sensor hole: Ø31.0 mm
• Mounting: Ø6.5 mm hole and 26.8 × 7.0 mm slot
• Material: 2.6 mm (12-gauge) cold-rolled steel

BRT-84 is a Banner round acrylic retroreflector with a centre mounting hole, for photo sensors working in retroreflective mode.

• Diameter: 84 mm
• Reflectivity factor: 1.4
• Mounting: centre hole, Ø4.5 mm
• Temperature: -20...+60 °C

Supplied without individual packaging.

SMB22A is a Banner right-angle bracket for sensors with a 22 mm housing. The curved slot lets the sensor be turned before the screws are tightened.

• Sensor hole: Ø22.2 mm
• Mounting: Ø4.6 mm hole and 4.6 x 16.9 mm slot, 26.0 mm hole centre spacing
• Material: 12-gauge stainless steel

BRT-THG-2-100 is a Banner self-adhesive retroreflective tape, 50 mm wide and 2.5 m long, used as a target for photo sensors in retroreflective mode. It is not recommended for polarized retroreflective sensors.

• Size: 50 mm wide, 2.5 m long
• Reflectivity factor: 0.7
• Temperature: max +60 °C

For full adhesion the surface must be clean.