Skip to Content
Filters
Relays and converters
Analogue sensor 4-20 mA interface, 2 x 4-20mA, IP67, NB-IoT
Out of stock
172.20 €
- Device is equipped with analog interfaces (2 x 4-20mA).
- External sensors can be powered by the device or by external power supply
- Data from the analog sensors is presented as current (4-20 mA)
- IP67 protection
- 40,000 measurements memory
- IP30 version EAN: 5905309601819
Inductive sensors
Inductive sensor NI15U-M18M-VP6X-H1141
Out of stock
90.30 €
Sn = 15 mm, M18×1 metal thread (chrome-plated brass, Factor 1 for all metals), non-flush, with connector M12, 10–30V DC, PNP NO/NC (changeover), Uprox+® technology, resistant to magnetic fields, IP68
2-Way Splitters
2-way splitter CSB-M1250M1250-T, M12 T splitter, 0.3 m
In stock: 1 pcs
79.00 €

CSB-M1250M1250-T is a Banner M12 T splitter listed among the power cordsets for Sure Cross wireless devices. It passes the supply and signal lines in parallel to both branches.

  • Connectors: M12x1, straight
  • Wiring: brown 1, white 2, blue 3, black 4, in parallel
  • Size: 62.7 x 43.0 mm
  • Ratings: 4 A, IP67, -40...+105 °C
Level sensors
Level sensor NR4100, radar FMCW, 0-30 m (0-20 m bulk), 4-20 mA HART, G 1", 5m cable, 4° antenna, max 80°C/3 bar, 6 years Extended Warranty
Out of stock
1,156.00 €
Housing: PVDF IP66/IP68, Type 6P 
Certificates: ATEX, IEC-Ex, cFMus, UKEX, INMETRO, KC, FCC, IC (Gas, dust explosion protection), 
WHG Measuring range: up to 30 m 
Measurement accuracy: ±2 mm 
Pressure range: -1 to +3 bar (-14.5 to +43.5 psi) 
Supply voltage: 12-35 V DC 
Process connection: NPT 1", R 1", G 1" or mounting flange (> DN 80 / 3") 
Process temperature: -40°C to +80°C (-40°F to +176°F) 
Signal output: 4...20 mA, 2-wire 
Communication: HART 
Sensitivity: DK value ≥ 1.1 
Sensor material: PVDF, FDA registered 
Frequency: 80 GHz FMCW
LED lights
LED indicator K50PSLRGB7Q, RGB 7 colors, programmable, PNP/NPN, IP69K, M12 5-pin
Out of stock
92.00 €

K50PSLRGB7Q is a Banner K50 Pro Select series 50 mm programmable RGB dome indicator with seven default colors. Colors, animations and input logic are reprogrammed with Banner Pro Editor software.

  • Colors: green, red, yellow, blue, white, cyan, magenta (default)
  • Inputs: bimodal PNP/NPN; gray wire - 1.5 Hz flash; response time 250 ms
  • Configuration: Pro Editor, Discrete Control (up to 15 states) and Pulse Control (up to 16 states by frequency on the white wire)
  • Supply: 10...30 V DC, 220 mA at 10 V, 115 mA at 24 V
  • Housing: polycarbonate, M30x1.5 threaded base, 50 x 69 mm
  • Environment: IP66, IP67, IP69K, UL 4X and 13, -40...+50 °C
  • Connection: integral 5-pin M12 male connector

Changing the settings requires a Pro Converter cable to connect to a PC. The Pro ID function takes the code of another K50 model and applies its colors and input logic, so one indicator can stand in for several standard K50 models.

CE and UL compliant. Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (30 G, 11 ms).

Level sensors
Level transmitter TL400-I, 4-20 mA output, 150 mm M12 cable
Out of stock
130.00 €
Non-Intrusive Level Sensor
TL400-I is a non-intrusive level sensor designed to offer maximum precision and durability in measuring liquids, grains, fluids, and bulk solids. Thanks to its advanced low-power laser technology, this device performs multiple measurements per second and converts them into information on level, volume, and distance. Its customizable Bluetooth capability makes it a versatile solution for different types of tanks, including those with irregular shapes.
Why Choose the TL400-I for Level Measurement?
Accurate measurements in industrial processes are essential for operational safety and efficiency. The TL400-I eliminates the disadvantages of traditional sensors that require direct contact with the material, which reduces their lifespan. This non-intrusive sensor ensures equipment integrity and provides accurate measurements throughout its lifecycle, with a minimal margin of error of ±3 mm.
Key Features of the TL400-I:
• Measurement range: Up to 4 meters
• Accuracy: ±3 mm
• Signal output: 4 to 20 mA
• Connectivity: 150 mm cable with 4-pin male M12 connector
• User interface: Compatible with mobile devices via the SigNow Mobile app (available on the Apple App Store and Google Play Store)
• Power supply: 8 to 33 Vdc
• Power consumption: <70 mA @ 12 Vdc or <40 mA @ 24 Vdc
• Electrical protection: Against polarity reversal
• Operating temperature: -20 to 80 °C
• Dimensions: Ø66 x 31 mm
• Mounting: SAE 5 holes (standard) or 4 holes (accessory adapter flange)
• Protection rating: IP68, suitable for harsh industrial environments
Advantages of a Non-Intrusive Sensor
In industrial processes, it is essential to have measurement equipment that ensures reliability and durability, regardless of environmental conditions. By not making direct contact with materials, the TL400-I avoids corrosion and damage that often affect traditional sensors. Additionally, its easy Bluetooth configuration allows for remote and real-time parameter adjustment, enhancing safety and operational efficiency.
Optimization for Complex Industrial Processes
The TL400-I is ideal for industries handling moving liquids, viscous substances, or difficult-to-handle solids. Its advanced technology enables precise measurement in challenging conditions, eliminating the need for frequent equipment replacement due to wear and tear. Furthermore, this sensor adapts to different types of materials, making it a versatile option for tanks used to store various products at different stages of the process.
Enhance Supply Management with Advanced Technology
Managing supplies in industrial silos and tanks can become complex without the right tool. The TL400-I is the ideal solution to optimize the management of liquids and solids, reducing downtime and operating costs. With real-time measurement capability and easy installation, this sensor becomes an indispensable ally in industrial processes requiring constant precision and control.
Optical sensors
Photo sensor array TTR558APSB6T-2.0Q3-061, roller conveyor, 6 beams, 558 mm, PNP, M8
Out of stock
224.00 €

TTR558APSB6T-2.0Q3-061 is a Banner Through the Roller sensor: an aluminium bar with six diffuse infrared beams that sits in the gap between conveyor rollers and detects the leading edge of letters, thin packages, poly bags, totes and boxes. All six beams switch one common output.

  • Sensing range: 0...≥120 mm on 90% white card, 0...≥50 mm on 18% grey, ≤3...≥30 mm on 6% black
  • Beams: 6, spacing 93.1 mm, first beam 61 mm from the cable end cap; infrared 940 nm
  • Output: PNP, Light Operate, 100 mA; response 1 ms
  • Supply: 18-30VDC, 45 mA
  • Housing: aluminium, 558 mm between frames, end cap style T for T-slot mounting
  • Environment: IP50, -10...+55 °C
  • Connection: 2 m cable with M8 4-pin snap connector

On the T-slot the sensor is 6 mm shorter than the stated between-frame distance, and the bracket and hardware are supplied by the customer. Keep at least 12 mm clearance to any fixed barrier in the beam path.

Vibration per IEC 60068-2-6, IEC 60947-5-2 and MIL-STD-202F, Method 201A; shock per IEC 60068-2-27.

Level sensors
Level sensor LMP307, 0-40 m H2O, 4-20 mA, 40 m PUR cable
Out of stock
457.00 €
LMP 307 is a stainless steel submersible probe with Ø27 mm housing, designed for continuous level measurement in water and clean or waste fluids. It is based on a high-quality stainless steel sensor that offers precise measurement and excellent long-term stability. Typical media include water, fuels and oils, making LMP 307 a robust choice for industrial and environmental level monitoring.
Connection Cables
Connection cable RKC4.4T-5-RSC4.4T/TXL, M12, female/male, straight, 4-pin, 5m PUR
Out of stock
19.70 €

RKC4.4T-5-RSC4.4T/TXL is a TURCK extension cable with a straight M12 female connector on one end and a straight M12 male connector on the other (4-pin). The PUR jacket is rated for moving installation, including drag chains.

  • Connectors: M12 x 1 female and M12 x 1 male, both straight, A-coded, 4-pin, gold-plated brass (CuZn) contacts
  • Cable: 5 m, PUR, black, Ø 4.5 mm, 4 x 0.34 mm², core colours BN, WH, BU, BK
  • Ratings: 4 A, 250 V, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -50...+80°C fixed, -25...+80°C mobile, -25...+60°C in a drag chain
  • Drag chain: at least 5 million bending cycles, up to 3.3 m/s and 5 m/s², bending radius ≥10 x Ø, torsion ±180°/m

The jacket resists chemicals, UV radiation, oils, welding sparks and abrasion, is flame retardant (FT2 per UL 1581, IEC 60332-2-2) and free from halogen, silicone, PVC and LABS. Approval: cULus.

Pressure sensors
Pressure sensor 17.600G, 0...500 bar, 0-10 V, G 1/4" EN 837
Out of stock
156.50 €
The 17.600 G is a welded stainless steel OEM pressure transmitter designed for demanding mobile hydraulics and industrial applications. It is suitable for mechanical and plant engineering, refrigeration technology, medical technology, and utility vehicles. Thanks to its robust design and high media compatibility, it can be used with fuels, oils, and oxygen.
Pressure sensors
Pressure sensor DMP331P, 0...0.3 bar, 4-20 mA, G 1" flush cone
Out of stock
452.00 €
DMP 331P is a flush-mounted stainless steel pressure transmitter designed for hygienic applications in the food and pharmaceutical industries. Its compact design with hygienic process connections ensures high accuracy, excellent temperature stability and long-term reliability. Thanks to its modular construction, it can be configured with different process connections, filling fluids, cooling elements and electrical connections, making it a flexible solution for most hygienic process applications.
Level sensors
NivoLED Indication, mount in cable gland/M20x1.5, ATEX, green/red/no color, 20-30VDC
Out of stock
65.00 €
The NivoLED® 9000 is a signal light specifically designed for use in hazardous areas. The LED visualizes the switching status of level sensors and displays status information from other technical devices through clearly visible colors, green and red. The operator is visually alerted to potential issues and can respond quickly to prevent system downtime. The LED can be configured with a level sensor or easily integrated into existing systems as an accessory.
Connection Cables
Connection cable RKC4.5T-1-RSC4.5T/TEL, M12, female/male, straight, 5-pin, 1m PVC
Out of stock
20.00 €

RKC4.5T-1-RSC4.5T/TEL is a TURCK extension cable with a straight M12 female connector on one end and a straight M12 male connector on the other (5-pin). The cable has a black PVC jacket.

  • Connectors: M12 x 1 female and M12 x 1 male, both straight, A-coded, 5-pin, gold-plated brass (CuZn) contacts
  • Cable: 1 m, PVC, black, Ø 5 mm, 5 x 0.34 mm², core colours BN, WH, BU, BK, GY
  • Ratings: 4 A, 60 V, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -40...+105°C fixed, -5...+80°C mobile

The jacket resists chemicals, oils, acids, alkaline solutions, microbes and hydrolysis, is flame retardant and free from LABS. Approval: cULus.

Connection Cables
Connection cable RKC4.5T-2-RSC4.5T/TEL, M12, female/male, straight, 5-pin, 2m PVC
Out of stock
21.40 €

RKC4.5T-2-RSC4.5T/TEL is a TURCK extension cable with a straight M12 female connector on one end and a straight M12 male connector on the other (5-pin). The cable has a black PVC jacket.

  • Connectors: M12 x 1 female and M12 x 1 male, both straight, A-coded, 5-pin, gold-plated brass (CuZn) contacts
  • Cable: 2 m, PVC, black, Ø 5 mm, 5 x 0.34 mm², core colours BN, WH, BU, BK, GY
  • Ratings: 4 A, 60 V, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -40...+105°C fixed, -5...+80°C mobile

The jacket resists chemicals, oils, acids, alkaline solutions, microbes and hydrolysis, is flame retardant and free from LABS. Approval: cULus.

Inductive sensors
Inductive sensor BI15U-CK40-AP6X2-H1141
Out of stock
60.70 €
Sn = 15 mm, CK40 rectangular housing (40 mm, plastic PBT-GF30-V0, Factor 1 for all metals), flush, with connector M12, 10–30V DC, PNP NO, Uprox® technology, active face orientable in multiple directions, high-luminance corner LEDs, with 2 LED indicators
Inductive sensors
Inductive sensor NI8U-M12EE-AP6X-H1141
Out of stock
63.70 €
Sn = 8 mm, M12×1 metal thread (chrome-plated brass, Factor 1 for all metals), non-flush, extended barrel, with connector M12, 10–30V DC, PNP NO, Uprox+® technology, resistant to magnetic fields, IP68
Vibration
Vibration and temperature sensor QM30VT3-SS-MQP, 3-axis, Modbus RTU, stainless steel, IP69K, M12 5-pin
Out of stock
430.00 €

QM30VT3-SS-MQP is a Banner QM30VT3 3-axis vibration and temperature sensor for condition monitoring of motors, pumps, fans and other rotating machines. It works as a Modbus RTU server on RS-485 and delivers pre-processed values such as RMS velocity, high-frequency RMS acceleration and peak velocity per axis.

  • Accuracy: vibration ±5 % at 25 °C; temperature ±3 °C
  • Measuring range: vibration ±16 g, 0...65.5 mm/s RMS, 6 Hz...5.3 kHz; temperature -40...+105 °C, resolution 1 °C
  • Output: RS-485, Modbus RTU, 9.6/19.2/38.4 kbaud
  • Supply: 10...30 V DC, 9 mA at 30 V DC
  • Housing: stainless steel 316L, 30 mm; mounting by M4 screw, epoxy, thermal tape or magnet
  • Environment: IP69K, -40...+105 °C
  • Connection: 150 mm cable with M12 5-pin male connector

High-frequency enveloping mode is available for bearing fault diagnostics, and the FMax setting (325...5300 Hz) trades bandwidth against frequency resolution. Configuration and firmware updates are done with the SNAP SIGNAL software and the BWA-UCT-900 USB adapter cable.

Shock per MIL-STD-202G, method 213B (100 g). FCC Part 15 Class B, ICES-003(B); CE and UKCA declaration of conformity.

Vibration
Vibration and temperature sensor QM30VT3-MQP, 3-axis, Modbus RTU, aluminium, IP67, M12 5-pin
In stock: 1 pcs
302.00 €

QM30VT3-MQP is a Banner QM30VT3 3-axis vibration and temperature sensor for condition monitoring of motors, pumps, fans and other rotating machines. It works as a Modbus RTU server on RS-485 and delivers pre-processed values such as RMS velocity, high-frequency RMS acceleration and peak velocity per axis.

  • Accuracy: vibration ±5 % at 25 °C; temperature ±3 °C
  • Measuring range: vibration ±16 g, 0...65.5 mm/s RMS, 6 Hz...5.3 kHz; temperature -40...+105 °C, resolution 1 °C
  • Output: RS-485, Modbus RTU, 9.6/19.2/38.4 kbaud
  • Supply: 10...30 V DC, 9 mA at 30 V DC
  • Housing: aluminium, 30 mm; mounting by M4 screw, epoxy, thermal tape or magnet
  • Environment: IP67, -40...+105 °C
  • Connection: 150 mm cable with M12 5-pin male connector

High-frequency enveloping mode is available for bearing fault diagnostics, and the FMax setting (325...5300 Hz) trades bandwidth against frequency resolution. Configuration and firmware updates are done with the SNAP SIGNAL software and the BWA-UCT-900 USB adapter cable.

Shock per MIL-STD-202G, method 213B (100 g). FCC Part 15 Class B, ICES-003(B); CE and UKCA declaration of conformity.

Relays and converters
Isolating switching amplifier IM12-22EX-R/24VDC, 2-channel, 2 relays NO, 10-30VDC
Out of stock
139.20 €

IM12-22EX-R/24VDC is a 2-channel TURCK isolating switching amplifier with intrinsically safe input circuits and two relay outputs, each with one NO contact. Front switches set the output mode (NO/NC) and signal multiplexing, where channel 1 drives both outputs.

  • Channels: 2 inputs for NAMUR sensors (EN 60947-5-6) or potential-free contacts
  • Outputs: 2 relays, 1 NO each, 30 V DC / 250 V AC, ≤2 A, ≤500 VA / 60 W
  • Supply: 10...30 V DC (24 V DC nominal)
  • Housing: polycarbonate/ABS, 104 x 18 x 110 mm, DIN rail (NS35) or panel mounting
  • Connection: screw terminals, 1 x 2.5 mm² / 2 x 1.5 mm²
  • Environment: IP20, -25...+60 °C

Used to pass NAMUR sensor or potential-free contact signals from a hazardous area to a relay input in the control cabinet. A green Pwr LED shows readiness and a yellow LED shows the output switching state.

Approvals: ATEX, CFMUS, TR CU.

Inductive sensors
Inductive sensor BI8-M18-VN6X-H1141
Out of stock
29.50 €
Sn = 8 mm, M18×1 metal thread (chrome-plated brass), flush, with connector M12, 10–30V DC, NPN NO/NC (changeover), with increased switching distance, IP67
Inductive sensors
Inductive sensor BI5U-Q12-AP6X2
Out of stock
74.10 €
Sn = 5 mm, flush, cable connection (2 m), 12–24 V DC, PNP NO, 3-wire
IIOT
Smart Wireless Video Bell for Android and IOS
Out of stock
150.00 €
Camera + Bell + Siren + App

Keep your front door secure with our 4-in-1 video doorbell & chime kit. Install in minutes and get a video system that streams live 2K video. Or, choose an Arlo Secure Subscription (sold separately) to save video clips in the cloud and look back at them via the app. Recieve a video call when the bell is pressed and speak in real-time to visitors with two-way audio. Plug in the chime to hear notifications in your home when someone presses your doorbell or when motion is detected. Plus, take instant action and scare away trespassers with the built-in intruder alarm. *Battery not removable, charge your video doorbell inside or hardwire it for continuous power.

IIOT
Tile by Life360 Essentials Bluetooth Tracker, Item Finder for Keys, Wallets. iOS & Android Compatible. 4-Pack
Out of stock
115.00 €
  • VARIETY OF TRACKERS: A selection of tiles that allow you to track keys, wallet, remote controls & more. Keep an eye on more for less money with our multipacks or give them a tracker to your loved ones
  • Find your stuff: let your misplaced Tile ring or track them in the free app
  • Find your phone: is the phone hidden under a pillow? Let it ring with your Tile - even when it's muted
  • Stay safe with SOS - Unobtrusively trigger an SOS notification to your loved ones in uncertain situations.
  • USE WITH LIFE360 - Add your Tiles to Life360, a top-notch app for family connections and security, to see everything and everyone on the same map
  • Works with iOS and Android: the free Tile app is suitable for all households and individuals
  • Specifications: 105m Bluetooth range Up to 3 years of battery life. Waterproof (IP68 certified)
  • GIVE THE GIFT TO FIND: Tile is a simple and functional gift for family and friends
IIOT
Tile by Life360 Essentials Bluetooth Tracker, Item Finder for Keys, Wallets. iOS & Android Compatible. 2pack
Out of stock
78.00 €
  • VARIETY OF TRACKERS: A selection of tiles that allow you to track keys, wallet, remote controls & more. Keep an eye on more for less money with our multipacks or give them a tracker to your loved ones
  • Find your stuff: let your misplaced Tile ring or track them in the free app
  • Find your phone: is the phone hidden under a pillow? Let it ring with your Tile - even when it's muted
  • Stay safe with SOS - Unobtrusively trigger an SOS notification to your loved ones in uncertain situations.
  • USE WITH LIFE360 - Add your Tiles to Life360, a top-notch app for family connections and security, to see everything and everyone on the same map
  • Works with iOS and Android: the free Tile app is suitable for all households and individuals
  • Specifications: 105m Bluetooth range Up to 3 years of battery life. Waterproof (IP68 certified)
  • GIVE THE GIFT TO FIND: Tile is a simple and functional gift for family and friends
Accessories
Small measuring wheel MR211.07A
Out of stock
49.80 €
Circumference 20 cm
Surface profile: Cross-knurled
Surface material: Aluminium
Bore ø7 mm
Connection Cables
Connection cable PKG4M-5/TEL, M8, female, straight, 4-pin, 5m PVC
Out of stock
12.20 €

PKG4M-5/TEL is a TURCK connection cable with a straight M8 female connector (4-pin) on one end and open cores on the other.

  • Connector: M8 x 1, female, straight, 4-pin, gold-plated brass (CuZn) contacts
  • Cable: 5 m, PVC, black, Ø 4.6 mm, 4 x 0.34 mm², core colours BN, WH, BU, BK
  • Ratings: 4 A, 50 VAC / 60 VDC, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -40...+105°C fixed, -5...+80°C mobile

The jacket resists chemicals, oils, acids, alkaline solutions, microbes and hydrolysis, is flame retardant and free from LABS. Approval: cULus.

Wireable connectors
Connector BS6-0, M16 male straight, 6-pin, 6...8mm cable
Out of stock
33.80 €

BS6-0 is a TURCK field-wireable M16 x 0.75 male connector, straight, 6-pin, for 6...8 mm cable.

  • Connector: M16 x 0.75, male, straight, 6-pin, silver-plated bronze (CuSn) contacts, more than 500 mating cycles
  • Ratings: 5 A, 60 V, contact resistance ≤5 mΩ
  • Connection: conductors up to 0.75 mm², cable diameter 6...8 mm, PG9 screw-in thread
  • Housing: black PA body, black PBT (UL 94 V0) contact carrier, nickel-plated die-cast zinc (GD-Zn) coupling nut
  • Environment: -40...+95°C fixed
Pressure sensors
Pressure sensor DMP331i, 0...10 bar, 0,1%, 4-20 mA, G 1/2" DIN 3852
Out of stock
470.00 €
DMP 331i is a precision stainless steel pressure transmitter designed for laboratory and environmental applications, as well as demanding industrial processes. The sensor signal is processed by digital electronics with a 16-bit A/D converter, enabling active compensation of temperature effects, hysteresis and non-linearity. This results in very high measurement accuracy and long-term stability.
Connection Cables
Connection cable PKG4M-0.3-PSG4M/TEL, M8, female/male, straight, 4-pin, 0.3m PVC
Out of stock
11.60 €

PKG4M-0.3-PSG4M/TEL is a TURCK M8 connection cable with straight female and male connectors, 4-pin, and a black PVC jacket.

  • Connectors: M8 x 1 female and M8 x 1 male, both straight, 4-pin each, gold-plated brass (CuZn) contacts, more than 100 mating cycles
  • Cable: 0.3 m, PVC, black, Ø 4.6 mm, 4 x 0.34 mm², PVC core insulation, core colours BN, WH, BU, BK
  • Ratings: 4 A, 50 V AC/60 V DC
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -40...+105°C fixed, -5...+80°C mobile

The jacket resists chemicals, oils, acids, alkaline solutions, microbes and hydrolysis, is flame retardant and free from LABS. Approval: cULus.

Connection Cables
Connection cable RKC8T-15/TEL, M12, female, straight, 8-pin, 15m PVC
Out of stock
47.10 €

RKC8T-15/TEL is a TURCK connection cable with a straight M12 female connector (8-pin) on one end and open cores on the other. The cable has a black PVC jacket.

  • Connector: M12 x 1, female, straight, A-coded, 8-pin, gold-plated brass (CuZn) contacts
  • Cable: 15 m, PVC, black, Ø 5.7 mm, 8 x 0.25 mm², core colours BN, WH, BU, BK, GY, PK, VT, OG
  • Ratings: 2 A, 30 V, more than 100 mating cycles
  • Housing: TPU, nickel-plated brass coupling nut, FPM/FKM seal
  • Environment: IP67, IP69K (only when screwed in); -40...+105°C fixed, -5...+80°C mobile

The jacket resists chemicals, oils, acids, alkaline solutions, microbes and hydrolysis, is flame retardant and free from LABS. Approval: cULus.

Led buttons and signal towers
LED indication tower TL50BGYRAOSQ, blue/green/yellow/red, audible 99 dB, 18-30VDC/24VAC, M12 8-pin
In stock: 1 pcs
258.00 €

TL50BGYRAOSQ is a Banner TL50 series 50 mm LED tower light with 4 colour segments: blue, green, yellow, red, from the bottom up, topped by a sealed omnidirectional audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

  • Colours: blue 470 nm, green 528 nm, yellow 590 nm, red 625 nm
  • Audible: continuous tone, 2.1 kHz, up to 99 dB at 1 m
  • Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
  • Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 45 mA
  • Housing: Ø50 x 278.7 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
  • Environment: IP67, -20...+50 °C
  • Connection: integral M12 male connector, 8-pin

The tower connects through a separately ordered 8-pin M12 female cordset. The omnidirectional alarm sounds at a fixed 99 dB with no intensity adjustment.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

Inductive sensors
Inductive sensor BI5U-Q12-AP6X2-V1131
Out of stock
74.10 €
Sn = 8 mm, flush, M8 connector, 12–24 V DC, PNP NO, 3-wire
Pressure sensors
Pressure sensor DMP331P, -1...3 bar, 4-20 mA, G 3/4" DIN 3852, M12 connector, 4-pin, edible oil
Out of stock
429.60 €
DMP 331P is a stainless steel pressure transmitter designed for hygienic applications in the food and pharmaceutical industries. Its compact design with hygienic process connections ensures high accuracy, excellent temperature stability and long-term reliability. Thanks to its modular construction, it can be configured with different process connections, filling fluids, cooling elements and electrical connections, making it a flexible solution for most hygienic process applications.
Inductive sensors
Inductive sensor NI6U-EG08-AP6X-V1131
Out of stock
83.30 €
Sn = 6 mm, M8×1 metal thread (stainless steel 1.4427, Factor 1 for all metals), non-flush, with connector M8, 10–30V DC, PNP NO, Uprox+® technology, resistant to magnetic fields, IP68
Inductive sensors
Inductive sensor BI2-M08E-AP6X-V1131
Out of stock
26.50 €
Sn = 2 mm, M8×1 metal thread (nickel-plated brass), flush, with connector M8, 10–30V DC, PNP NO, with increased switching distance, extended barrel
Showing 2480 of 3051 results
Load more