Skip to Content
Pressure sensors
Pressure sensor DMK331, -1…0 bar, 0-10 V, G 1/2" DIN 3852, flush, M12 connector, 4-pin
269.50 €
DMK 331 is an industrial pressure transmitter with a ceramic sensor, designed for use with pasty, contaminated or aggressive media, as well as oxygen at low pressure ranges. A wide choice of electrical and mechanical connections makes it easy to integrate into different systems. Typical application areas include mechanical and plant engineering, the energy sector, medical technology and environmental engineering.
Pressure sensors
Pressure sensor DMP331, -0.1...0 bar, 0…10 V, G 1/2" DIN 3852, flush, M12 connector, 4-pin
348.20 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Accessories
2" Well Dock & Sleeve
52.00 €

Creates a secure anchor point for cables and suspension wires at the top of a well. Available for 2, 4, and 6 inch wells, this dock is ideal for use with cables and suspension wires.

2" Vented locking well cap
85.00 €

Vented, lockable well cap made of nylon, available for 2 or 4 inch wells. Locks with a standard #1 padlock. The well cap creates a watertight compression seal. Installed using. Mallet, it is three inches tall when installed. High impact and heat resistance, UV protected and chemically resistant.

Accessories
Savienošanās kabelis, non-vented, 15 metri
324.00 €

0052000NV- 0052000-03 15meters meters

Water quality
Rugged TROLL 200, 0-9m (abs), datu logeris, iebūvētā baterija/ārējā barošana, līmenis un temperatūra, SDI-12, Modbus RTU RS485
610.00 €

Temperature ranges1 Operational: 0 to 50° C (32-122° F) Storage: -40 to 80° C (-40 to 176° F) Calibrated: 0 to 50° C (32 to 122° F) Diameter 2.62 cm (1.03 in.) Length 14.43 cm (5.68 in.) Weight 137 g (0.30 lb) Materials Titanium, Acetal, FKM Fluoroelastomer, Ceramic Output options Rugged TROLL 200: USB or RS232 via docking station; Modbus/RS485 or SDI-12 via Rugged TROLL 200 Cable; Wireless TROLL Com Battery type & life 3.6 V lithium; 10 years or 2M readings Memory 2.0 MB Data records 120,000 (data record = date/time plus 2 parameters logged (no wrapping) from device within the factory-calibrated temperature range) Accuracy (FS) ±0.1% Resolution ±0.01% FS or better Units of measure Pressure: psi, kPa, bar, mbar, mmHg, inHg Level: in, ft, mm, cm, m Temperature Sensor Accuracy ±0.3° C Resolution 0.01° C or better Units of measure Celsius or Fahrenheit

Accessories
Rugged Baro TROLL - for use with Rugged TROLL 100 and 200. Deploy on backshell hanger (included) or Direct Read cable
420.00 €

Temperature ranges Operational: 0-50° C (32-122° F) Storage: -40-80° C (-40-176° F) Calibrated: 0-50° C (32-122° F) Diameter 2.62 cm (1.03 in.) Length 14.43 cm (5.68 in.) Weight 137 g (0.30 lb) Materials Titanium body; Delrin nose cone, hanger, backend Output options USB or RS232 via docking station; Modbus/RS485 or SDI-12 via Rugged TROLL 200 Cable Battery type & life 3.6 V lithium; 10 years or 2M readings External power 8-36 VDC Memory 2.0 MB Data records 120,000 Fastest logging rate 1 per minute Fastest output rate Modbus & SDI-12: 1 per second Log types Linear Sensor Type/Material Piezoresistive; Ceramic Range 7.0 to 30.0 psi; 0.5 to 2 bar Accuracy (FS) ±0.1% Resolution ±0.01% FS or better Units of measure Pressure: psi, kPa, bar, mbar, mmHg, inHg Temperature Sensor Accuracy ±0.3° C Resolution 0.01° C or better Units of measure Celsius or Fahrenheit

Water quality
Rugged TROLL 100, 0-9m (abs), data loger, internal power, level and temperature
420.00 €

Temperature ranges Operational: 0 to 50° C (32-122° F) Storage: -40 to 80° C (-40 to 176° F) Calibrated: 0 to 50° C (32 to 122° F) Diameter 2.62 cm (1.03 in.) Length 14.43 cm (5.68 in.) Weight 137 g (0.30 lb) Materials Titanium, Acetal, FKM Fluoroelastomer, Ceramic Output options Rugged TROLL 100: USB or RS232 via docking station Battery type & life 3.6 V lithium; 10 years or 2M readings Memory 2.0 MB Data records 120,000 (data record = date/time plus 2 parameters logged (no wrapping) from device within the factory-calibrated temperature range) Accuracy (FS) ±0.1% Resolution ±0.01% FS or better Units of measure Pressure: psi, kPa, bar, mbar, mmHg, inHg Level: in, ft, mm, cm, m Temperature Sensor Accuracy ±0.3° C Resolution 0.01° C or better Units of measure Celsius or Fahrenheit

Level sensors
Level switch RN3004, ATEX, 230VAC, max. +250°C, G 1 1/2", L=400mm
1,155.20 €
Process Temperature: max. +250°C (482°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 230 V AC, 50-60 Hz, 4 VA Process Connection: Thread G 1½", DIN 228 Material of Process Connection: Stainless steel Length of Extension L: Special length, 400 mm Material of Extension L: Stainless steel Measuring Vane: Hinged vane, 98 x 200 mm (3.86 x 7.87"), double-sided (L = 10 mm [0.39"] longer)
PLC and FLC
TX700S-P3WV01 Single-Core IOT Gateway — CODESYS V3 PLC with WEB VISU
611.00 €

DIN Rail Device for the Control Cabinet; Operating voltage; 2 separated RJ45 Ethernet ports with 10/100 Mbit; 1 serial interface (RS232, RS485, RS422); 1 USB host port; 1 SD card slot

HMI
HMI/PLC food&beverage TX707FB-P3CV01, plug in modules
1,861.00 €

7” Display for F&B — CODESYS V3 PLC with TARGET and WEB VISU

High-Quality Metal Housing and Glass Front with a Capacitive Touch

Ident. no.: 100007471
    • 7" TFT wide screen color display
    • LED backlight
    • 800 x 480 pixel resolution
    • 16 M colors
    • Capacitive touchscreen with glass front and polyester coating
    • Stainless steel frame and food-grade seal
    • IP69 degree of protection, high-pressure watertight up to 80 °C
    • Acid- and chemical-resistant
    • 3 RJ45 Ethernet ports with 10/100 Mbit
    • 1 serial interface (RS232, RS485, RS422)
    • 2 USB host ports
    • 1 SD card slot
Accessories
Hexagon nut G1" stainless steel 1.4305
22.00 €
Spare Part Type: Hexagon nut Size: 1" Material: Stainless steel 1.4305 (303) Item Number: zu200160 Usable for Series: RN 3000 RN 6000 RN 4000 RF 3000
Humidity sensors
Compressed air RH+T+Tdp sensor with 4-20mA output, cable 4 meters
384.00 €
Humidity, temperature transmitter. T+RH probe from hard anodized duralumin for compressed air up to 25 bars on the cable. Outdoor, indoor use.

Relative humidity, temperature sensors at probe on the cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

The device is supplied with T+RH probe with 4 meter cable.
Pressure sensors
Pressure sensor DMP331, 0...0.1 bar, 4-20 mA, G 1/2" DIN 3852, flush
333.00 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Level sensors
3D sensor ZMX-3DE2500HF-Q7, ZMX Series 3D Time of Flight Sensor, Fill Level Sensor, 2 NPN/PNP
1,449.00 €

With Switching Outputs; Operating voltage 12…30 VDC; Max. range 2500 mm; Aluminum housing; IP65; Connection: 1 × M8 male connector, 4-pin; 1 × M8 female connector, 4-pin; Field of view: 60 × 45° (3104 × 2374 mm at max. range); Resolution: 272 × 208 pixels; Operating voltage: 12…30 VDC; Output 1: PNP/NPN switching output, Pulse Pro, switchable; Output 2: PNP/NPN switching output, Pulse Pro, switchable; Ethernet interface (M8 × 1 female connector, 4-pin); Supports Modbus TCP and EtherNet/IP

Level sensors
Level sensor LMP307, 0-15 m H2O, 4-20 mA, 70 m PUR cable
640.00 €
LMP 307 is a stainless steel submersible probe with Ø27 mm housing, designed for continuous level measurement in water and clean or waste fluids. It is based on a high-quality stainless steel sensor that offers precise measurement and excellent long-term stability. Typical media include water, fuels and oils, making LMP 307 a robust choice for industrial and environmental level monitoring.
Level sensors
Level sensor LMK351, 0-2.5 m H2O, 4-20 mA, G 1 1/2" DIN 3852 flush, 2 m PVC cable
530.50 €
LMK 351 is a screw-in pressure transmitter with a flush ceramic sensor, designed for small system pressure and level measurement in tanks and containers. The in-house developed capacitive ceramic element offers high resistance to aggressive process conditions. Thanks to the flush diaphragm, it is also suitable for operation in viscous and pasty process environments, including aggressive fluids, fuels and oils, water and wastewater, making it ideal for environmental and renewable energy applications.
Level sensors
Level sensor LMK458, 0-0.85 m H20, 4-20 mA, 5 m TPE-U cable
814.50 €
LMK 458 is a hydrostatic level probe with a Ø39.5 mm stainless steel housing and a ceramic sensor, developed for level measurement in service and storage tanks. It is certified for shipbuilding and offshore applications. With an operating temperature of up to 125 °C and the option for intrinsically safe versions, it can be used under harsh conditions with a wide range of fluids, including water, sewage, sludge, fuels and oils. The in-house developed capacitive ceramic element provides high overload resistance and excellent medium compatibility.
Showing 1120 of 2924 results
Load more