Q2FAN3FF15-Q is a Banner Q2F series fixed-field photo sensor with a 15 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.
- Sensing range: 15 mm cutoff, fixed; spot size 1.4 mm at 15 mm
- Output: NPN, Light Operate, 50 mA; protected against short circuit and overload
- Response: 850 µs; repeatability 125 µs
- Supply: 10-30 V DC, < 20 mA; reverse polarity protected
- Housing: flat, PC housing and lens cover, mounting with M3 screws
- Environment: IP65, -25...+55 °C
- Connection: 150 mm PVC cable with M8 male connector, 4-pin
Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 0.5 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.
CE and cULus Listed.
