O200.EL-PV1T.72NV/FREC_H006 is the receiver half of a Baumer O200 miniature through-beam pair, working with a pulsed red laser emitter over a 6 m nominal range. Sensitivity is set with qTeach - a ferromagnetic tool held against the housing instead of a potentiometer - so once the machine runs there is no adjustment on the sensor for anyone to turn.
- Range: actual 5 m, nominal 6 m; smallest detectable object 3 mm (0.5 mm with aperture)
- Output: PNP complementary, light/dark operate, 50 mA
- Supply: 10...30 VDC, typ. 10 mA at 24 VDC
- Response time: < 0.1 ms, jitter < 0.03 ms
- Housing: rectangular 8 x 25.1 x 14.1 mm, ASA plastic, PMMA optics, M3 stainless steel threaded sleeves
- Environment: IP 67, -25...+50 °C
- Connection: M8 4-pin flylead connector, 200 mm
Typical positions are counting and presence checks on packaging and assembly lines, where the aperture accessory brings 0.5 mm parts and gaps within reach. A flashing output indicator reports weak signal margin or a soiled lens, so alignment is checked without instruments. Reciprocal influence is suppressed, so several pairs can work side by side.
