IR30.P18S-F35.PV1Z.7BCV is a Baumer M30 inductive sensor with enhanced sensing distance (GammaProx): 18 mm for flush mounting in a 35 mm housing. The complementary PNP output gives an NO and an NC signal at the same time; wire colours are brown +Vs, blue 0 V, black NO, white NC.
- Sensing distance: 18 mm, flush mounting; temperature drift ±10 %, hysteresis 3...20 % of Sr
- Output: PNP complementary (NO/NC); output current < 200 mA, voltage drop < 2 VDC; switching frequency 500 Hz
- Supply: 6...36 VDC, 4-wire, current consumption max. 10 mA (no load)
- Protection: short circuit, reverse polarity
- Housing: M30x1.5, nickel-plated brass, length 35 mm, PBT sensing face, red LED, tightening torque max. 140 Nm
- Environment: IP67, operating temperature -25...+75 °C
- Connection: 2 m cable
Correction factors for the target material: mild steel 100 %, stainless steel 70 %, aluminium 40 %. In a steel plate, mount the sensor with the sensing face protruding 1/3 Sn; the sensing distance is then 105 % of Sn. With the face level with the plate the sensor does not work in mild or stainless steel, and in aluminium it reaches 75 % of Sn.
