IGYX 12P17B3/S14L is a Baumer inductive proximity sensor in an M12 barrel with a 4 mm nominal sensing distance and a PNP normally open (NO) output. The sensing face is flush mountable and the nickel-plated brass housing is 50 mm long.
- Sensing distance: 4 mm (Sn), assured 3.2 mm (Sa)
- Output: PNP, normally open (NO), 200 mA, with short-circuit and reverse-polarity protection
- Supply: 10...30 V DC, current consumption up to 15 mA with no load
- Housing: M12 thread, nickel-plated brass, PBT sensing face, 50 mm long, flush mountable
- Environment: IP 67, operating temperature -25...+75 °C
- Connection: M12 connector
The sensor is intended for presence and end-position monitoring of metal parts on conveyors, pneumatic cylinders and indexing mechanisms. Switching frequency is 1.5 kHz. Tightening torque on the M12 thread must not exceed 10 Nm, and the switching point drifts by up to ±10 % of Sr across the temperature range, which matters when the target sits close to the 4 mm limit.
Complies with the EMC requirements of EN 60947-5-2:2007.
