IGYX 12P17B1/S14L is a Baumer inductive proximity sensor in an M12 barrel with a 4 mm nominal sensing distance and a PNP normally open (NO) output. The sensing face is flush mountable and the nickel-plated brass housing is 60 mm long.
- Sensing distance: 4 mm (Sn), assured 3.2 mm (Sa)
- Output: PNP, normally open (NO), <200 mA, with short-circuit and reverse-polarity protection
- Supply: 10...30 V DC, current consumption up to 15 mA with no load
- Housing: M12 thread, nickel-plated brass, PBT sensing face, 60 mm long, flush mountable
- Environment: IP 67, operating temperature -25...+75 °C
- Connection: M12 connector
The sensor is intended for presence and end-position monitoring of metal parts on conveyors, pneumatic cylinders and indexing mechanisms. Switching frequency is <1.5 kHz. Tightening torque on the M12 thread must not exceed 10 Nm, and the switching point drifts by up to ±10 % of Sr across the temperature range, which matters when the target sits close to the 4 mm limit.
Complies with the EMC requirements of EN 60947-5-2:2007.
