IGYX 08P37B3/S35L is a Baumer inductive proximity sensor in an M8 barrel with a 2 mm nominal sensing distance and a PNP normally closed (NC) output. The sensing face is flush mountable and the stainless steel housing is 36 mm long.
- Sensing distance: 2 mm (Sn), assured 1.6 mm (Sa)
- Output: PNP, normally closed (NC), 200 mA, with short-circuit and reverse-polarity protection
- Supply: 10...30 V DC, current consumption up to 15 mA with no load
- Housing: M8 thread, stainless steel, PBT sensing face, 36 mm long, flush mountable
- Environment: IP 67, operating temperature -25...+75 °C
- Connection: M8 connector
The Ø 8 mm body and 36 mm length fit the sensor into grippers, indexing tables and other positions where an M12 barrel does not fit. A 3 kHz switching frequency is enough for presence monitoring of fast moving metal parts. Tightening torque on the M8 thread must not exceed 5 Nm, and the switching point drifts by up to ±10 % of Sr across the temperature range, which matters when the target sits close to the 2 mm limit.
Complies with the EMC requirements of EN 60947-5-2:2007.
