T18-2VPFF50-Q8 is a Banner T18-2 series fixed-field photo sensor with a 50 mm cutoff and a visible red beam, in a right-angle 18 mm housing for washdown areas. It detects objects closer than the cutoff and ignores everything beyond it, so a background just behind the target does not switch the output.

• Sensing range: 50 mm cutoff, fixed
• Output: complementary PNP, Light Operate (black wire) and Dark Operate (white wire), 100 mA total (50 mA above +55 °C)
• Response: 2 ms ON, 2 ms OFF; repeatability 200 µs
• Supply: 10-30 V DC (10-24 V DC above +55 °C), < 16 mA
• Housing: right-angle, M18x1 thread, PBT polyester, PMMA window, epoxy-encapsulated electronics
• Environment: IP67, IP68, IP69K, -40...+70 °C
• Connection: integral M12 4-pin male connector

On dark targets the cutoff moves slightly closer: to 98 % of the nominal distance on an 18 % grey card and 95 % on a 6 % black card. There is no sensitivity adjustment. A green LED shows power and flashes at a marginal signal; the amber LED shows that the black-wire output is on.

ECOLAB certified chemical compatibility. Vibration tested to MIL-STD-202G, method 201A; shock to method 213B (75 g operating).

Q2FAP3FF15-Q is a Banner Q2F series fixed-field photo sensor with a 15 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 15 mm cutoff, fixed; spot size 1.4 mm at 15 mm
• Output: PNP, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 150 mm PVC cable with M8 male connector, 4-pin

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 0.5 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

Q2FAP3FF15-Q5 is a Banner Q2F series fixed-field photo sensor with a 15 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 15 mm cutoff, fixed; spot size 1.4 mm at 15 mm
• Output: PNP, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 150 mm PVC cable with M12 male connector, 4-pin

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 0.5 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

Q2FAP3FF15-2M is a Banner Q2F series fixed-field photo sensor with a 15 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 15 mm cutoff, fixed; spot size 1.4 mm at 15 mm
• Output: PNP, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 2 m PVC cable, 4 wires, unterminated

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 0.5 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

Q2FAN3FF15-Q is a Banner Q2F series fixed-field photo sensor with a 15 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 15 mm cutoff, fixed; spot size 1.4 mm at 15 mm
• Output: NPN, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 150 mm PVC cable with M8 male connector, 4-pin

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 0.5 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

Q2FAP3FF30-Q is a Banner Q2F series fixed-field photo sensor with a 30 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 30 mm cutoff, fixed; spot size 2.6 mm at 30 mm
• Output: PNP, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 150 mm PVC cable with M8 male connector, 4-pin

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 1.7 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

Q2FAP3FF30-Q5 is a Banner Q2F series fixed-field photo sensor with a 30 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 30 mm cutoff, fixed; spot size 2.6 mm at 30 mm
• Output: PNP, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 150 mm PVC cable with M12 male connector, 4-pin

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 1.7 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

Q2FAP3FF30-2M is a Banner Q2F series fixed-field photo sensor with a 30 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 30 mm cutoff, fixed; spot size 2.6 mm at 30 mm
• Output: PNP, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 2 m PVC cable, 4 wires, unterminated

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 1.7 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

Q2FAN3FF30-Q is a Banner Q2F series fixed-field photo sensor with a 30 mm cutoff and a visible red beam, in a flat low-profile housing. It detects objects closer than the cutoff and ignores everything beyond it, and the flat housing fits installations where a standard sensor housing does not.

• Sensing range: 30 mm cutoff, fixed; spot size 2.6 mm at 30 mm
• Output: NPN, Light Operate, 50 mA; protected against short circuit and overload
• Response: 850 µs; repeatability 125 µs
• Supply: 10-30 V DC, < 20 mA; reverse polarity protected
• Housing: flat, PC housing and lens cover, mounting with M3 screws
• Environment: IP65, -25...+55 °C
• Connection: 150 mm PVC cable with M8 male connector, 4-pin

Target colour has little effect on the cutoff: between 90 % and 6 % reflectance it shifts by no more than 1.7 mm. There is no sensitivity adjustment. With a shiny background, tilt the sensor so the reflection is directed away from it. A green LED shows power; the amber LED shows that light is sensed and flashes at a marginal signal.

CE and cULus Listed.

5905309603929 is an Efento NB-IoT wireless data logger that measures CO₂ concentration, temperature, relative humidity and atmospheric pressure. It sends data directly over the cellular NB-IoT network to Efento Cloud or your own server, with no gateway, cabling or Wi-Fi.

• Accuracy: CO₂ ±(30 ppm + 3 % of reading); temperature ±0.2 °C; humidity ±2 % RH (0...90 % RH), ±3 % RH (90...99 % RH); pressure ±0.5 hPa
• Measuring range: CO₂ 400...5000 ppm, temperature -25...+70 °C, humidity 0...100 % RH, pressure 300...1250 hPa
• Communication: NB-IoT (LTE Cat NB2), CoAP protocol, transmission interval 1 min...7 days; Bluetooth Low Energy for configuration
• Memory: 100,000 measurements, measurement interval 1 min...30 days
• Power: replaceable 8500 mAh battery, battery life up to 8 years
• Housing: white ABS plastic, 32.5 × 60 × 125 mm, 145 g with battery
• Environment: IP30, operating temperature -25...+70 °C, 0...99 % RH non-condensing

Intended for air quality monitoring in offices, schools, kindergartens, laboratories and server rooms. The sensor is configured and activated with the Efento mobile app over Bluetooth; firmware and settings can be updated remotely.

Complies with CE (RED), FCC and RoHS. A calibration certificate from an ISO/IEC 17025 accredited laboratory is available on request.