Skip to Content
Filters
2" Vented locking well cap
Out of stock
85.00 €

Vented, lockable well cap made of nylon, available for 2 or 4 inch wells. Locks with a standard #1 padlock. The well cap creates a watertight compression seal. Installed using. Mallet, it is three inches tall when installed. High impact and heat resistance, UV protected and chemically resistant.

Accessories
2" Well Dock & Sleeve
Out of stock
52.00 €

Creates a secure anchor point for cables and suspension wires at the top of a well. Available for 2, 4, and 6 inch wells, this dock is ideal for use with cables and suspension wires.

Connection technology
VS-M12-YE end-cap
Out of stock
49.60 €

M12, 100 pcs. per bag

Pressure sensors
Pressure sensor DMP331, -0.1...0 bar, 0…10 V, G 1/2" DIN 3852, flush, M12 connector, 4-pin
Out of stock
348.20 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Pressure sensors
Pressure sensor DMK331, -1…0 bar, 0-10 V, G 1/2" DIN 3852, flush, M12 connector, 4-pin
Out of stock
269.50 €
DMK 331 is an industrial pressure transmitter with a ceramic sensor, designed for use with pasty, contaminated or aggressive media, as well as oxygen at low pressure ranges. A wide choice of electrical and mechanical connections makes it easy to integrate into different systems. Typical application areas include mechanical and plant engineering, the energy sector, medical technology and environmental engineering.
Level sensors
Level sensor LMP307, 0-4 m H2O, 4-20 mA, 35 m PUR cable
Out of stock
426.00 €
LMP 307 is a stainless steel submersible probe with Ø27 mm housing, designed for continuous level measurement in water and clean or waste fluids. It is based on a high-quality stainless steel sensor that offers precise measurement and excellent long-term stability. Typical media include water, fuels and oils, making LMP 307 a robust choice for industrial and environmental level monitoring.
Inductive sensors
Inductive sensor NI3-M08-AP6X-V1131
Out of stock
30.00 €
Sn = 3 mm, M8×1 metal thread (nickel-plated brass), non-flush, with connector M8, 10–30V DC, PNP NO, with increased switching distance, IP67
Temperature sensors
Temperature sensor PT100, 4x100mm, sharp, food grade, SIL handle, SIL cable 5m, max +200°C, water resistant
In stock: 36 pcs
65.00 €
Size: 4x100mm 
Shape: Sharp  
Handle Material: SIL (silicone handle)  
Cable Type: SIL (silicone cable)  
Cable Length: 5 m  
Maximum Temperature: +200°C  
Water Resistant: Yes
Inductive sensors
Inductive sensor BI10-EM30-AP6/S907, max +160C
Out of stock
316.60 €
SN=10mm, Threaded barrel, M30 x 1.5, Stainless steel, 1.4571, High Temperatures up to +160 °C, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection
Gateway
Digirail IOT Industrial IoT Gateway RS485 slave, master, 8 variables
Out of stock
150.00 €
Industrial IoT Gateway
DigiRail IoT is an I/O module developed to meet the market demand for IoT-connected instruments, acting as a smart gateway to connect sensors and actuators to the Internet of Things.This device has versions with Wi-Fi or Ethernet connectivity, to play a fundamental role as an IoT Gateway, communicating with other systems through protocols such as MQTT and Modbus-TCP. This versatility is the biggest differential of DigiRail IoT, allowing it to be easily integrated with local or cloud systems.
DigiRail IoT provides RS485 connection for operation as a gateway, master, or Modbus slave, with the ability to monitor and publish up to 8 variables from other devices. Its message management system also ensures data traffic security. It is configured using the NXperience software and has connection to the main market clouds, such as Google Cloud, Microsoft Azure, Amazon AWS, NOVUS Cloud, or any other compatible IoT cloud platform. It also offers support, via the Xperience Trust software, to systems validated according to FDA CFR 21 part 11.

Inductive sensors
Inductive sensor BI10U-M18-IOL6X2-H1141
In stock: 1 pcs
96.20 €
Sn = 10 mm, M18×1 metal thread (chrome-plated brass, Factor 1 for all metals), flush, with connector M12, 10–30V DC, IO-Link (with switching output/DI on pin 2), Uprox® technology, resistant to magnetic fields, large switching distance, IP68
Radar sensors
Radara sensors T30R-1515-CKIQP, 0.1-6m
Out of stock
660.00 €
Radar-based sensors for detecting and measuring moving and stationary targets FMCW radar detects moving and stationary objects Adjustable sensing field—ignores objects beyond setpoint Easy setup and configuration of range, sensitivity, and output using the Banner Measurement Sensor Configuration Software Sensing functions are immune to wind, fog, steam, and temperature changes and resistant to rain and snow Compact, rugged IP67 housing withstands harsh environments Available in a variety of beam patterns, including models optimized for near-range sensing
Humidity sensors
Compressed air RH+T+Tdp sensor with 4-20mA output
Out of stock
363.00 €

Humidity, temperature transmitter. T+RH probe from hard anodized duralumin for compressed air up to 25 bars on the cable. Outdoor, indoor use.

Relative humidity, temperature sensors at probe on the cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

The device is supplied with T+RH probe with 1 meter cable.

Pressure sensors
Pressure sensor 17.600G, 0...600 bar, 4-20mA, G 1/4" DIN 3852
Out of stock
135.00 €
The 17.600 G is a stainless steel OEM pressure transmitter designed for demanding mobile hydraulics and industrial applications. It is suitable for mechanical and plant engineering, refrigeration technology, medical technology, and utility vehicles. Thanks to its robust design and high media compatibility, it can be used with fuels, oils, and oxygen.
Pressure sensors
Pressure sensor DMP331, -1...5 bar, 4-20mA Ex ec, G 1/2" EN 837
Out of stock
300.60 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Pressure sensors
Pressure sensor DMP331, 0...16 bar, 4-20 mA Ex ec, G 1/2" EN 837
Out of stock
280.60 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
3MP Wireless Solar & Battery Powered Security Camera with Smart Detection
In stock: 1 pcs
85.00 €

3MP HD Resolution People/Vehicle/Animal Detection Spotlight Night Vision

Sensors
ELSYS VOC level, temperature, humidity, light, and motion (PIR) sensor. LoRaWAN
Out of stock
187.00 €

Weight 80 g excluding batteries / 120 g including batteries Dimensions 86 x 86 x 27 mm Enclosure Plastic, PC/ABS Operating conditions Temperature 0 to 50 °C Humidity 0 to 85% RH (non-condensing) Device Power Supply Battery Type 2 x 3.6V AA Lithium Batteries Expected Battery Life <10 years (Depending on configurations and environment) Device Logging Function Sampling Interval Configurable via NFC and downlink configuration Temperature Resolution: 0.1 °C Accuracy: ±0.2 °C Humidity Resolution: 0.1 % RH Accuracy at 25 °C: ± 2 % RH CO2 • Range, calibrated: 0 – 2000 ppm • Range, extended: 0 – 10000ppm • Accuracy, calibrated: ± 50 ppm / ± 3% of reading • Accuracy, extended: ± 10% of reading

Gas sensors
Gas detector propānam,2 x parslēdzošie releji 250VAC/30VDC 6A, skaņas signāls 85dB un LED indikācija, IP65, sensora pašdiagnostika ieslēdzoties un atsevišķi aktivizējot slēdzi, reakcijas laiks 1 sekunde, vides temperatūra -40/+70C
Out of stock
158.90 €

E2630-LEL-C3H8-230-A Gāzes detektors E2630-LEL-230VAC, 2 x parslēdzošie releji 250VAC/30VDC 6A, skaņas signāls 85dB un LED indikācija, IP65, sensora pašdiagnostika ieslēdzoties un atsevišķi aktivizējot slēdzi, reakcijas laiks 1 sekunde, vides temperatūra -40/+70C

Level sensors
Level switch RN3001, 24 VDC / 22..230 VAC, measuring vane 98 x 200 mm, G 1 1/2", L=150mm
Out of stock
643.00 €
Process Temperature: max. +80°C (176°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 24 V DC / 22..230 V AC universal voltage Process Connection: Thread G 1½", DIN 228 Material of Process Connection: Stainless steel Length of Extension L: 150 mm (5.91") Material of Extension L: Stainless steel Measuring Vane: Hinged vane, 98 x 200 mm (3.86 x 7.87"), double-sided (L = 10 mm [0.39"] longer) Local Certificates: Without Bearing at Tube End: Without (Note: For RN 3004, bearing at tube end is factory mounted) Extension / Flange Welded: Without
Inductive sensors
Inductive sensor NI15U-EM18WD-AP6X-H1141
Out of stock
95.90 €
Sn = 15 mm, M18×1 metal thread (stainless steel 1.4404 / AISI 316L, Factor 1 for all metals), non-flush, extended barrel, with connector M12, 10–30V DC, PNP NO, Uprox+® technology, resistant to magnetic fields, pressure resistant, wash down, IP68/IP69K, -40…+100 °C
Pressure sensors
Pressure sensor DMP331, 0...10 bar, 4-20 mA Ex ia, G 1/2" DIN 3852
Out of stock
318.30 €
DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.
Pressure sensors
Pressure sensor 17.600G, 0...400 bar, 0-10 V, G 1/4" internal, M12 connector, 4-pin
Out of stock
172.90 €
The 17.600 G is a welded stainless steel OEM pressure transmitter designed for demanding mobile hydraulics and industrial applications. It is suitable for mechanical and plant engineering, refrigeration technology, medical technology, and utility vehicles. Thanks to its robust design and high media compatibility, it can be used with fuels, oils, and oxygen.
Level sensors
Level switch 24Vdc/22-230Vac, G 1 1/2", L=2000mm
Out of stock
871.00 €
Process Temperature: max. +80°C (176°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 24 V DC / 22..230 V AC universal voltage Process Connection: Thread G 1½", DIN 228 Material of Process Connection: Stainless steel Length of Extension L: Special length 2000 mm Material of Extension L: Stainless steel Measuring Vane: Boot-shaped, 40 x 98 mm (1.57 x 3.86") stainless steel, suitable for 1½" socket Local Certificates: None Bearing at Tube End: None (Note for RN 3004: Bearing at tube end is factory mounted) Extension / Flange Welded: None
Level sensors
Level sensor NC8100, 4-20mA, R 1 1/2, cable L= 6000mm
Out of stock
1,413.00 €
Temperature Extended Shaft: Without Electronic Module: 2-wire, 4-20 mA Process Connection: Thread R 1½" BSPT, EN 10226 Probe Length L: Custom specified cable length, 6000 mm Material of Process Connection / Extension: Stainless steel 1.4404 / PFA (Rope version, rope not PFA) Local Certificates: None Cable Entry: 2x screwed cable gland M20x1.5
Showing 1920 of 2897 results
Load more