Status display SD50P300WSQP, Modbus RTU, 300 mm, 12-30VDC, IP65, M12 4-pin

SD50P300WSQP is a Banner SD50 status display with a 300 mm white LED text line and RGB indicator LEDs, controlled over Modbus RTU on RS-485. Text, colours and animations are written to Modbus registers by a PLC or a DXM controller.

• Display: 8x96 pixel white LED text line, 300 mm long, RGB indicator LEDs in 14 colours, legible from 10 m
• Communication: Modbus RTU server, RS-485, default 19.2 kbit/s; text up to 29 characters in Run mode
• Supply: 12...30 VDC, max. 550 mA at 12 VDC, 260 mA at 24 VDC
• Housing: black polycarbonate, smoky polycarbonate window, 325x50x28 mm
• Environment: IP65, -20...+50 °C
• Connection: 150 mm PVC cable with 4-pin M12 male connector

Several displays can share one RS-485 line, each with its own Modbus address, to show counts, takt time or fault text along a line. The M12 cordset is ordered separately. End caps take M5 and 1/4-20 fasteners (screws not included); clip brackets are available as accessories.

Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (15 G, 11 ms). Suitable for damp locations per UL 2108.