BID2-G180-AP6/S212 is a TURCK pressure-resistant inductive sensor in a stainless steel M18 housing. The sensing face withstands 500 bar static and 350 bar dynamic pressure, so it can sit directly in a hydraulic cylinder or valve.
- Switching distance: 2 mm, flush mounting; correction factors steel 1, stainless steel 0.7, brass 0.4, aluminium 0.3
- Output: PNP, NO, 3-wire, max. 200 mA, switching frequency 2 kHz; short-circuit, wire-break and reverse polarity protection
- Supply: 10...30 VDC, no-load current 15 mA
- Housing: M18 x 1 stainless steel 1.4305, PA12-GF30 sensing face, thread length 29 mm, nut torque max. 25 Nm
- Environment: IP67, operating temperature -25...+85 °C
- Connection: 2 m Ölflex cable, 3 x 0.5 mm², Ø 6.3 mm
Typical use is end-position detection of a piston inside a hydraulic cylinder.
MTTF 1804 years (SN 29500, 40 °C). Shock 30 g (11 ms), vibration 55 Hz (1 mm).
