BI8-Q10-VP68X2-0.3-RS4.4 is a TURCK rectangular inductive sensor for vehicle electrical systems with 12 V and 24 V supply, with E1 type approval from the German Federal Motor Transport Authority. Correction factors: steel St37 = 1, stainless steel 0.7, brass 0.4, aluminium 0.3, so non-ferrous targets are detected at a shorter distance.
- Switching distance: 8 mm, flush mounting
- Output: PNP, complementary (NO + NC), 4-wire, max. 200 mA, switching frequency 1 kHz; short-circuit, wire-break and reverse polarity protection
- Supply: 8.6...30 VDC, no-load current 15 mA
- Housing: rectangular Q10, 42 x 25 x 10.8 mm, PBT-GF30-V0, active face on top, laser-engraved label
- Environment: IP68 / IP69K, operating temperature -40...+85 °C
- Connection: 0.3 m PUR cable, 4 x 0.14 mm², Ø 3 mm, M12 male connector, 4-pin, nickel-plated brass coupling nut
Interference immunity 100 V/m radiated (ISO 11452-4) and 100 mA BCI (ISO 11452-2). Salt spray tested to EN 60068-2-52 severity 5, rapid temperature change -40...+85 °C to EN 60068-2-14. A green LED shows power and a yellow LED the switching state.
E1 type approval. Shock 150 g (6 ms) to EN 60068-2-27, vibration 20 g (10...3000 Hz) to EN 60068-2-6. MTTF 2283 years (SN 29500, 40 °C).
