BI30R-Q20-AP6X2-H1141 is a TURCK inductive ring sensor with a 30.1 mm inner diameter that detects metal parts passing through the ring. It has a static output with a stretched pulse of at least 100 ms, so even a part flying through at up to 40 m/s gives a signal long enough for a PLC to read.
- Detection: inner diameter 30.1 mm, steel ball ≥ 6 mm (DIN 5401), fly-by speed up to 40 m/s
- Output: PNP, NO, 3-wire, max. 200 mA; pulse ≥ 100 ms ± 20 %, pause ≥ 5 ms; short-circuit, wire-break and reverse polarity protection
- Supply: 10...30 VDC, no-load current 15 mA
- Housing: ring Q20, 68 x 40 x 20 mm, PBT-GF30-V0, POM coil body
- Environment: IP65, operating temperature -25...+70 °C
- Connection: M12 connector, 4-pin
Used to count or confirm small metal parts - screws, rivets, balls - falling through a feed tube or chute. A green LED shows power and a yellow LED the switching state.
MTTF 2283 years (SN 29500, 40 °C). Shock 30 g (11 ms), vibration 55 Hz (1 mm).
