BI20U-CP40-VP4X2 is a TURCK uprox+ inductive sensor with a 20 mm switching distance in a flush-mountable CP40 rectangular housing with a terminal chamber. Correction factor 1 for all metals and immune to magnetic AC and DC fields up to 300 mT, so steel, stainless steel, aluminium and brass are detected at the same distance.
- Switching distance: 20 mm, flush mounting, factor 1 for all metals
- Output: PNP, complementary (NO + NC), 4-wire, max. 200 mA; short-circuit, wire-break and reverse polarity protection, switching frequency 0.25 kHz
- Supply: 10...65 VDC, no-load current 15 mA
- Housing: rectangular CP40, 114 x 40 x 40 mm, PBT-GF30-V0, PA6-GF30-X sensing face
- Environment: IP68, operating temperature -30...+85 °C
- Connection: terminal chamber, M20 x 1.5 cable entry
The sensing head turns to 9 positions, and two green and two yellow corner LEDs show power and switching state from any side. The terminal chamber takes a field cable directly, without a connector.
MTTF 874 years (SN 29500, 40 °C). Shock 30 g (11 ms), vibration 55 Hz (1 mm).
