Inductive sensor SI12SM-BE4 NO/NC, M12, non-flush, Sn=4mm, 10-55VDC 2-wire, NO/NC, 2 m PVC cable, IP67

SI12SM-BE4 NO/NC is an AECO M12 inductive sensor for 10...55 VDC with a 4 mm sensing distance for non-flush mounting. The 2-wire output is programmable as NO or NC; a yellow LED shows the output state.

• Sensing distance: 4 mm, non-flush mounting; operating distance 0...3.24 mm, hysteresis < 10 %, repeatability < 3 %
• Output: 2-wire, NO/NC programmable; load 1.5...100 mA, residual current < 0.6 mA, voltage drop < 6.5 V; switching frequency 1000 Hz
• Supply: 10...55 VDC
• Protection: reverse polarity, short circuit (pulsed), overload
• Housing: M12x1, nickel-plated brass, length 67.5 mm, red POM sensing face, nickel-plated brass nuts
• Environment: IP65, IP66, IP67, operating temperature -25...+70 °C
• Connection: 2 m PVC/PVC cable, 2 x 0.25 mm²

Correction factors for other target metals: stainless steel 0.9, brass 0.5, aluminium 0.4, copper 0.4.

Complies with the EMC directive 2014/30/EU; product standard EN 60947-5-2.