NI12U-M18-ADZ30X2 is a TURCK uprox Factor 1 inductive sensor in 2-wire AC/DC technology, so the same part runs on 20...250 VAC or 10...300 VDC. Correction factor 1 for all metals and immune to magnetic AC and DC fields up to 300 mT, so steel, stainless steel, aluminium and brass are detected at the same distance.
- Switching distance: 12 mm, non-flush mounting
- Output: 2-wire, NO, max. 400 mA AC / 300 mA DC, min. load current 3 mA, residual current 1.7 mA, voltage drop ≤ 6 V, switching frequency 0.01 kHz
- Supply: 20...250 VAC (50...60 Hz) or 10...300 VDC; short-circuit protection (latching), reverse polarity protection
- Housing: M18 x 1 chrome-plated brass, PBT sensing face, thread length 45 mm, nut torque max. 25 Nm
- Environment: IP68, operating temperature -30...+85 °C
- Connection: 2 m PVC cable, 3 x 0.5 mm², Ø 5.2 mm
Being a 2-wire device, it is wired in series with the load like a mechanical switch, which suits replacing limit switches on AC control circuits. The residual and minimum load currents above decide whether a given relay or PLC input will work with it. A green LED shows power and a yellow LED the switching state.
MTTF 874 years (SN 29500, 40 °C). Shock 30 g (11 ms), vibration 55 Hz (1 mm).
