Inductive sensor SI18-CE8 PNP NO H, M18, non-flush, Sn=8mm, PNP NO, M12 connector

SI18-CE8 PNP NO H is an AECO M18 inductive sensor with an 8 mm sensing distance for non-flush mounting and a PNP normally open (NO) output. Four LEDs around the connector end show the switching state.

• Sensing distance: 8 mm, non-flush mounting; hysteresis < 10 %, repeatability ≤ 3 %
• Output: PNP, NO; up to 200 mA, voltage drop < 1.8 V; switching frequency 1000 Hz
• Supply: 10...30 VDC, 3-wire, current consumption < 15 mA at 24 VDC; short-circuit protection
• Housing: M18x1, nickel-plated brass, length 70 mm plus 10.5 mm sensing head
• Environment: operating temperature -25...+85 °C; IP rating depends on the mating connector
• Connection: H plug - M12 connector, 4-pin male (pins 1, 3, 4 used); cable ordered separately

For non-flush mounting, keep a metal-free zone of at least the sensor diameter on each side of the sensing head and 2 diameters between two sensors side by side.