Inductive sensor IS-30-A15-03, M30, flush, Sn=10mm, 20-250VAC, 2-wire NO, 2 m PVC cable, IP67

IS-30-A15-03 is a Datalogic (Datasensing) M30 inductive sensor for 20...250 VAC supply, with a 10 mm sensing distance for flush mounting. The normally open (NO) output is an SCR on two wires; a yellow LED shows the output state.

• Sensing distance: 10 mm, flush mounting; operating distance 0...8.1 mm, standard target 30 x 30 mm FE360
• Output: SCR, NO, 2-wire; load 20...500 mA (inrush 1.5 A), residual current < 0.7 mA, voltage drop ≤ 4 V at 100 mA; switching frequency 25 Hz
• Supply: 20...250 VAC, 50/60 Hz; start-up delay < 300 ms
• Protection: short circuit (self-resetting), inductive loads
• Housing: M30x1.5, nickel-plated brass, length 56 mm, PA16 sensing face, tightening torque max. 40 Nm; 2 M30x1.5 nuts included
• Environment: IP67, operating temperature -25...+70 °C
• Connection: 2 m PVC cable, 2 x 0.25 mm²

Approvals: CE, cULus.