Q5XKILAF3000-Q8 is a Banner Q5X series Class 2 laser triangulation sensor that outputs distance over 95...3000 mm as a 4...20 mA signal and has a second channel for switching or IO-Link. It detects black targets below 6 % reflectance and shows the distance on its display.
- Repeatability (switching output): ±0.5 mm at 95...300 mm, ±0.25 % at 300...1000 mm, ±0.5 % at 1000...2000 mm, ±1 % at 2000...3000 mm
- Measuring range: 95...3000 mm
- Output 1: analog 4...20 mA, max. load 300 Ω; response time 0.5...2270 ms depending on measurement rate and averaging
- Output 2: PNP/NPN switching or IO-Link push/pull, 50 mA; IO-Link v1.1, 38.4 kbit/s, Smart Sensor Profile
- Supply: 12...30 V DC, < 1 W; protected against reverse polarity and transient overvoltage
- Housing: ABS, PMMA lens cover, polycarbonate display window; side mounting
- Environment: IP67, -10...+50 °C
- Connection: integral M12 male connector, 5-pin, rotatable through 270°
The analog span and the switch point are taught separately, so one sensor can feed a continuous distance value to the controller and signal a limit at the same time. The sensor reaches full performance after 10 minutes of warm-up.
Vibration per MIL-STD-202G method 201A, shock per method 213B condition I (100 g).