Photo sensor O300.RP-PV1T.72CU, retro-reflective, 5 m, PNP NO/NC, 2 m cable

O300.RP-PV1T.72CU is a miniature photoelectric sensor from the Baumer O300 series working against a reflector over a 5 m range. A polarisation filter lets the sensor respond only to the light returned by the reflector, so shiny metal or film in the object's place is not read as a reflector.

• Range: 5 m actual, 6 m nominal, with polarisation filter
• Output: PNP complementary, NO and NC at the same time, light / dark operate, < 100 mA
• Supply: 10...30 V DC, typical consumption 25 mA
• Housing: rectangular, plastic (ASA, PMMA), PMMA optics, 12.9 x 32.3 x 23 mm
• Environment: IP 67, -25...+60 °C
• Connection: 2 m cable, 4 cores

The sensor suits counting and presence checks on conveyors and packaging lines where the sensor and the reflector can face each other. Sensitivity is set with qTeach by holding a ferromagnetic tool against the housing, and mutual interference between sensors mounted side by side is suppressed.