S4BR30-1200-S is the receiver of a Banner EZ-SCREEN S4B Type 4 safety light curtain with a 1200 mm defined area and 30 mm resolution (hand detection). When any beam is interrupted, both OSSD safety outputs switch off; the lighted end cap shows clear, weak beam, blocked beam or fault from a distance.
- Defined area: 1200 mm; resolution 30 mm; response time 15.0 ms
- Operating range: 0.1...12 m
- Outputs: two redundant PNP OSSD safety outputs, 24 V DC, max 0.5 A each; configurable pin for weak beam output or IO-Link (COM2)
- Supply: +24 V DC ±15 %, 96 mA typical without load
- Housing: anodised aluminium, 38 x 40 mm, glass-filled polycarbonate end caps
- Environment: IP65, -20...+55 °C, indoor use
- Connection: RD (removable disconnect) socket; 5-pin or 8-pin RD cordset with M12 ordered separately
With the 8-pin RD cordset the receiver monitors the contactors itself (EDM) and needs no external safety module; with the 5-pin cordset it is wired to a safety relay, safety controller or safety PLC. Reduced resolution can be switched on to ignore one blocked beam, and up to four pairs can be cascaded. Models longer than 900 mm need an additional side mount bracket.
Type 4 per IEC 61496-1 and -2, Category 4 PL e per EN ISO 13849-1, SIL3 per IEC 61508. MTTFd 287 years, PFHd 3.08 × 10⁻⁹ (single pair).