S4BR14-300-S is the receiver of a Banner EZ-SCREEN S4B Type 4 safety light curtain with a 300 mm defined area and 14 mm resolution (finger detection). When any beam is interrupted, both OSSD safety outputs switch off; the lighted end cap shows clear, weak beam, blocked beam or fault from a distance.
- Defined area: 300 mm; resolution 14 mm; response time 11.5 ms
- Operating range: 0.1...12 m
- Outputs: two redundant PNP OSSD safety outputs, 24 V DC, max 0.5 A each; configurable pin for weak beam output or IO-Link (COM2)
- Supply: +24 V DC ±15 %, 96 mA typical without load
- Housing: anodised aluminium, 38 x 40 mm, glass-filled polycarbonate end caps
- Environment: IP65, -20...+55 °C, indoor use
- Connection: RD (removable disconnect) socket; 5-pin or 8-pin RD cordset with M12 ordered separately
With the 8-pin RD cordset the receiver monitors the contactors itself (EDM) and needs no external safety module; with the 5-pin cordset it is wired to a safety relay, safety controller or safety PLC. Reduced resolution can be switched on to ignore one blocked beam, and up to four pairs can be cascaded.
Type 4 per IEC 61496-1 and -2, Category 4 PL e per EN ISO 13849-1, SIL3 per IEC 61508. MTTFd 289 years, PFHd 3.05 × 10⁻⁹ (single pair).