Will Sensors

Home
Search
⁰
Wishlist
⁰
Cart
Account

My Cart

My Wishlist

View Wishlist

Guest

[18.601G-D012-R-1-5-TA0-200-1-000 (10m)] Pressure sensor 18.601G, 0...10 bar, 4-20mA, G 1/2" EN 837, 10 m PVC cable

Pressure sensors

Pressure sensor 18.601G, 0...10 bar, 4-20mA, G 1/2" EN 837, 10 m PVC cable

174.50 €

The 18.601G OEM Pressure Transmitter is a low-pressure sensor designed for general industrial applications. It features a stainless steel measuring cell combined with a Viton (FKM) seal, ensuring good chemical resistance and reliable performance. Its compact, robust design makes it well suited for integration into OEM equipment and machinery.

[2202-0002.0] Temperature transmitter 4-20mA, ATEX, head

Relays and converters

Temperature transmitter 4-20mA, ATEX, head

75.00 €

[2620117] Capacitive sensor BC10-QF5.5-AP6X2

Capacitive sensor BC10-QF5.5-AP6X2

Capacitive sensors

Capacitive sensor BC10-QF5.5-AP6X2

101.90 €

[gm403020] Spare part Motor/PCB RN 3000/ RN 4000 24V DC 5/min [W]

Spare part Motor/PCB RN 3000/ RN 4000 24V DC 5/min [W]

Accessories

Spare part Motor/PCB RN 3000/ RN 4000 24V DC 5/min [W]

232.00 €

Voltage: 24 V DC Motor Speed: 5/min Heating of Housing: No Fail Safe: No Item Number: gm403020 Used for Series: RN 3000 RN 4000

[0100110] 4G/LTE/2G Low Gain Stub Antenna (IP65, 50 mm)

Accessories

4G/LTE/2G Low Gain Stub Antenna (IP65, 50 mm)

33.00 €

[30.600G-1003-R-1-8-M10-300-2-1] Pressure sensor 30.600G, 0...100 bar, 4-20 mA, G1/4" DIN 3852, M12 connector, 4-pin

Pressure sensors

Pressure sensor 30.600G, 0...100 bar, 4-20 mA, G1/4" DIN 3852, M12 connector, 4-pin

114.20 €

30.600G is a low-cost OEM pressure transmitter for mechanical and plant engineering and general industrial applications. It uses a robust ceramic sensor with 1% span accuracy according to EN IEC 62828-2 and is available in nominal pressure ranges from 0…1.6 bar up to 0…250 bar. Typical areas of use include mechanical and plant engineering, the energy sector and utility vehicles / mobile hydraulics.

[76E-4000-K-5-2-H-1-4-B-005-000] Level sensors LMK458H, 0-0.4 bar, 4-20 mA HART, G 1 1/2", 5m TPE-U cable, housing Copper-nickel-alloy (CuNi10Fe1Mn) - resistant against sea water,

Level sensors

Level sensors LMK458H, 0-0.4 bar, 4-20 mA HART, G 1 1/2", 5m TPE-U cable, housing Copper-nickel-alloy (CuNi10Fe1Mn) - resistant against sea water,

1,087.30 €

Sea water resistant

[8065571] Connection cable HT-WWAK4.5-25/S2430, high-temperature resistant

Connection Cables

Connection cable HT-WWAK4.5-25/S2430, high-temperature resistant

277.40 €

Temperature range of the cable: -190°C…260°C

[451-1002-1-1-1-1-3-2-100-000] Level sensor LMP307, 0-100 m H2O, 4-20 mA, 100 m PUR cable

Level sensors

Level sensor LMP307, 0-100 m H2O, 4-20 mA, 100 m PUR cable

660.00 €

LMP 307 is a stainless steel submersible probe with Ø27 mm housing, designed for continuous level measurement in water and clean or waste fluids. It is based on a high-quality stainless steel sensor that offers precise measurement and excellent long-term stability. Typical media include water, fuels and oils, making LMP 307 a robust choice for industrial and environmental level monitoring.

[zu400470] Accessories Aiming flange NR 4000, fitting to DN80 / 3", female thread G1", PP GF30

Accessories

Accessories Aiming flange NR 4000, fitting to DN80 / 3", female thread G1", PP GF30

338.00 €

Size: DN 80 / 3'' Material: PP GF30 Process connection: G 1" Process temperature: -40...80°C (-40...176°F) Pressure: 0.1 bar (1.45 psi) Number of screws: 4 Fitting screws: M16 x 60 Set of screws: not included Item number: zu400470 Usable for series: NR 4000

[100047155] Connection cable RSSX-RJ45S-8814-3M, X-coded

Connection Cables

Connection cable RSSX-RJ45S-8814-3M, X-coded

63.50 €

[815-S1K6-1-0-G-0-1-Y00-M-000] Differential pressure sensor DPS300, -0.0016…0.0016 bar, 4-20 mA, Ø 6,6 x 11, without display

Pressure sensors

Differential pressure sensor DPS300, -0.0016…0.0016 bar, 4-20 mA, Ø 6,6 x 11, without display

362.00 €

DPS 300 is a differential pressure transmitter designed for optimal monitoring of air flows. Developed for HVAC applications, it is suitable for measuring non-aggressive gases. It provides stable, reliable readings and is easy to integrate into ventilation, air conditioning, and building automation systems.

Media:

Gases

[E2610-LEL-CH4-24-A] Methane / LPG / acetylene / hydrogen 0...100% LEL, 24 VDC/AC, 2 x SPDT relays (switch-over contact) 250 VAC / 30 VDC, 5 A max Alarms, blinking LED, buzzer 85 dB

Gas sensors

Methane / LPG / acetylene / hydrogen 0...100% LEL, 24 VDC/AC, 2 x SPDT relays (switch-over contact) 250 VAC / 30 VDC, 5 A max Alarms, blinking LED, buzzer 85 dB

142.00 €

[RN3001A041EA3Z3AL400SPEC600°C] Līmeņa slēdzis RN3, +600°C, 24VDC, G1 1/2", L=400mm, grafīta gultnis

Level sensors

Līmeņa slēdzis RN3, +600°C, 24VDC, G1 1/2", L=400mm, grafīta gultnis

1,149.40 €

Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 24 V DC, 2.5 W Process Connection: Thread G 1½", DIN 228 Material of Process Connection: Stainless steel Length of Extension L: Special length, 400 mm Material of Extension L: Stainless steel Measuring Vane: Boot-shaped, 40 x 98 mm (1.57 x 3.86") stainless steel, suitable for 1½" socket Material of Housing: Aluminium

[815-S102-3Z-0-8-C-1-Y00-M-000] Differential pressure sensor DPS300, -1...1 bar, 0-10 V/ 4-20 mA / 0-20 mA, Ø 6,6 x 11, LCD

Pressure sensors

Differential pressure sensor DPS300, -1...1 bar, 0-10 V/ 4-20 mA / 0-20 mA, Ø 6,6 x 11, LCD

350.00 €

DPS 300 is a differential pressure transmitter designed for optimal monitoring of air flows. Developed for HVAC applications, it is suitable for measuring non-aggressive gases. It provides stable, reliable readings and is easy to integrate into ventilation, air conditioning, and building automation systems.

Media:

Gases

[815-S300-3Z-0-8-C-1-Y00-M-000] Differential pressure sensor DPS300, -0.3...0.3 bar, 0-10 V/ 4-20 mA/ 0-20 mA, Ø 6,6 x 11, LCD

Pressure sensors

Differential pressure sensor DPS300, -0.3...0.3 bar, 0-10 V/ 4-20 mA/ 0-20 mA, Ø 6,6 x 11, LCD

360.00 €

DPS 300 is a differential pressure transmitter designed for optimal monitoring of air flows. Developed for HVAC applications, it is suitable for measuring non-aggressive gases. It provides stable, reliable readings and is easy to integrate into ventilation, air conditioning, and building automation systems.

Media:

Gases

[600-V502-E-3-G10-200-1-000] Pressure sensor DMP457, -1...5 bar, 4-20 mA Ex ia, G 1/2" EN 837

Pressure sensors

Pressure sensor DMP457, -1...5 bar, 4-20 mA Ex ia, G 1/2" EN 837

372.90 €

DMP 457 is a stainless steel pressure transmitter designed for harsh marine, shipbuilding and offshore environments. It provides high accuracy and long-term stability for media compatible with 316L stainless steel, such as fuels, oils and water. With marine approvals (LR, DNV, GL, CCS), it is well suited for mechanical and plant engineering, the oil & gas sector and marine applications.

[18.601G-0500-R-1-8-M00-200-1-000] Pressure sensor 18.601G, 0...0.05 bar, 4-20 mA, G 1/2" EN 837, M12 connector, 4-pin

Pressure sensors

Pressure sensor 18.601G, 0...0.05 bar, 4-20 mA, G 1/2" EN 837, M12 connector, 4-pin

163.00 €

The 18.601G OEM Pressure Transmitter is a low-pressure sensor designed for general industrial applications. It features a stainless steel measuring cell combined with a Viton (FKM) seal, ensuring good chemical resistance and reliable performance. Its compact, robust design makes it well suited for integration into OEM equipment and machinery.

[E2638-NH3-E] Ammonia detector-transmitter Range 0...100 / 0...300 / 0...1000 ppm NH3 2 × 4-20 mA or 0-10 V, RS485

Gas sensors

Ammonia detector-transmitter Range 0...100 / 0...300 / 0...1000 ppm NH3 2 × 4-20 mA or 0-10 V, RS485

290.00 €

[6625460] Connection Cable RKS8T-10/TXL, shielded

Connection Cable RKS8T-10/TXL, shielded

Connection Cables

Connection Cable RKS8T-10/TXL, shielded

43.30 €

[6836455] Pressure sensor PT25R-2008-I2-DA91/X, 0...25 bar, 4-20 mA, G 1/2" male

Spiediena sensors PT25R-2008-I2-DA91/X, 0-25Bar, 4-20mA, G1/2"

Pressure sensors

Pressure sensor PT25R-2008-I2-DA91/X, 0...25 bar, 4-20 mA, G 1/2" male

130.50 €

[6625243] Connection cable WKC4.5T-1-RSC4.5T/TEL

Connection Cables

Connection cable WKC4.5T-1-RSC4.5T/TEL

19.40 €

[6625611] Connection cable RKC4.5T-1-RSC4.5T/TXL

Connector cable RKC4.5T-1-RSC4.5T/TXL

Connection Cables

Connection cable RKC4.5T-1-RSC4.5T/TXL

21.30 €

[11062237] Encoder ITD 23 A 4 Y 2 128 H BX K10SK4 S 14

Encoders

Encoder ITD 23 A 4 Y 2 128 H BX K10SK4 S 14

350.90 €

[LD142-M7-R-L050] Linear position sensor LD142-M7-R-L050 (old p/n LD142-M7-R-5)

Linear position

Linear position sensor LD142-M7-R-L050 (old p/n LD142-M7-R-5)

243.00 €

[110-6001-1-3-M10-F00-000] Pressure sensor DMP331, 0...6 bar, 4-20 mA, G 1/2" DIN 3852, flush, M12 Connector, 4-pin

Pressure sensors

Pressure sensor DMP331, 0...6 bar, 4-20 mA, G 1/2" DIN 3852, flush, M12 Connector, 4-pin

297.20 €

DMP 331 is a stainless steel pressure transmitter for universal industrial applications, provided the medium is compatible with stainless steel 1.4404 (316L) or 1.4435 (316L). Various elastomer seals and a helium-tested welded version are available. Its modular design allows combining different sensor elements, electronic modules, and electrical/mechanical connections, resulting in a wide range of configurations that meet almost all industrial requirements.

[3018251] Connection Cable MQDC2S-1206RA, Image Processing

Connection Cable MQDC2S-1206RA, Image Processing

Wireable connectors

Connection Cable MQDC2S-1206RA, Image Processing

129.00 €

[13401] Inductive sensor NI20-CP40-FZ3X2

Inductive sensors

Inductive sensor NI20-CP40-FZ3X2

138.90 €

[401-4001-1-1-1-1-2-2-080-000] Level sensors LMP305, 0-40 m H2O, 4-20 mA, 80 m PUR cable

Level sensors

Level sensors LMP305, 0-40 m H2O, 4-20 mA, 80 m PUR cable

742.70 €

[SNT-B712-F] Skaņas signāls 40-250AC/DC, MAX 131DB, 16 toņi, IP65

Led buttons and signal towers

Skaņas signāls 40-250AC/DC, MAX 131DB, 16 toņi, IP65

72.00 €

[RN3004E041EH3P3K_0***000000_0B*0000000_000000*A0A] Level switch RN3004, 24VDC, flange 150 x 150 4 x 18 LK170, L=200mm

Level sensors

Level switch RN3004, 24VDC, flange 150 x 150 4 x 18 LK170, L=200mm

1,221.00 €

Process Temperature: max. +350°C (662°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 24 V DC, 2.5 W Process Connection: Flange 150 x 150, 4 x 18 LK170 Material of Process Connection: Stainless Steel Length of Extension L: 200 mm (7.87") (Special Length: 0 mm) Material of Extension L: Stainless Steel Measuring Vane: Hinged vane, 98 x 200 mm (3.86 x 7.87"), double-sided (L = 10 mm [0.39"] longer) Housing Material: Aluminium Shaft Sealing Ring: Standard Mounting Set: For counter flange with thread M16

[451-1000-1-1-1-1-5-1-005-000] Level sensor LMP307, 0-1 m H2O, 4-20 mA, 5 m PVC cable

Level sensors

Level sensor LMP307, 0-1 m H2O, 4-20 mA, 5 m PVC cable

318.00 €

LMP 307 is a stainless steel submersible probe with Ø27 mm housing, designed for continuous level measurement in water and clean or waste fluids. It is based on a high-quality stainless steel sensor that offers precise measurement and excellent long-term stability. Typical media include water, fuels and oils, making LMP 307 a robust choice for industrial and environmental level monitoring.

[500-V302-1-1-M10-P41-1-0-2-111] Pressure sensor DMP331Pi, -1...3 bar, 4-20 mA, Varivent DN40/50, M12 connector, 4-pin

Pressure sensors

Pressure sensor DMP331Pi, -1...3 bar, 4-20 mA, Varivent DN40/50, M12 connector, 4-pin

663.60 €

DMP 331 Pi is a high-precision, stainless steel pressure transmitter for hygienic applications in the food and pharmaceutical industries. The specially designed stainless steel sensor is combined with a new digital electronics platform that actively compensates hysteresis, temperature errors and non-linearity. Standard operation is possible from -40…125 °C, and with an integrated cooling element the process temperature range can be extended up to 300 °C.

[381-6000-1-2-1-1-5-1-007-000] Level sensor LMK307, 0-6 m H2O, 4-20 mA, 7 m PVC cable

Level sensors

Level sensor LMK307, 0-6 m H2O, 4-20 mA, 7 m PVC cable

321.00 €

LMK 307 is a submersible level transmitter with a Ø27 mm stainless steel probe and a flush ceramic sensor, designed for continuous level measurement in water and wastewater applications. It is suitable for fluids compatible with the wetted materials, including water, sewage, sludge, fuels and oils. Different cable and elastomer materials are available to match specific operating conditions, making LMK 307 a robust choice for environmental and industrial installations.

[LWK2.00.F146.E05.001] Temperatūras un mitruma sensors 2x0-10V izejas, 0-100%Rh, -40...+60°C, 13...30 VDC / 24VAC±10% barošana

Humidity sensors

Temperatūras un mitruma sensors 2x0-10V izejas, 0-100%Rh, -40...+60°C, 13...30 VDC / 24VAC±10% barošana

146.74 €

[1569904] Inductive sensor NI4-DSU26-2AP4X2-H1141

Inductive sensors

Inductive sensor NI4-DSU26-2AP4X2-H1141

147.40 €

[RN4001A0AA1US***_0A**0*****_0*000000**_****0***00_0_0_0] Level switch 230Vac, CE certified, G1 1/2 thread, PA6 housing, double plastic vane 27x150mm,L=130mm

Level switch 230Vac, CE certified, G1 1/2 thread, PA6 housing, double plastic vane 27x150mm,L=130mm

Level sensors

Level switch 230Vac, CE certified, G1 1/2 thread, PA6 housing, double plastic vane 27x150mm,L=130mm

232.00 €

Power Supply: 230 V AC, 50-60 Hz, 4 VA Process Connection: Thread G 1½", DIN 228 Material of Process Connection: Plastic PA6 Measuring Vane: Universal vane, 27 x 150 mm (1.06 x 5.91") plastic Length of Extension L: Standard (for material plastic only)

[4685742] Magnetinductive sensor BIM-UNT-AP7X-0.3-PSG3S

Magnetinductive

Magnetinductive sensor BIM-UNT-AP7X-0.3-PSG3S

34.20 €