Inductive sensor IPS30-N15PO79-A12, M30, non-flush, Sn=15mm, PNP NO, M12 connector, IP67

IPS30-N15PO79-A12 is an XECRO M30 inductive sensor for non-flush mounting with a 15 mm standard sensing distance and a PNP normally open (NO) output. A switching indicator is built into the housing.

• Sensing distance: 15 mm, non-flush mounting; repeatability < 1 % of Sn, hysteresis 3...15 %
• Output: PNP, NO; load up to 200 mA, voltage drop < 1.5 V at 200 mA; switching frequency 150 Hz
• Supply: 10...30 VDC, 3-wire, current consumption < 8 mA
• Protection: reverse polarity, short circuit (self-resetting)
• Housing: M30, nickel-plated brass, length 79 mm, PBT sensing face, tightening torque max. 75 Nm
• Environment: IP67, operating temperature -20...+70 °C
• Connection: M12 connector

The sensing distance applies to steel. For other metals multiply it by the reduction factor: aluminium 0.45, brass 0.50, stainless steel 0.85.