MFH202 (MFB3002BBPKG/B/AM/500/US) is an ifm pressure-resistant inductive position sensor for hydraulic cylinders, rated for 500 bar operating pressure. It is installed through the cylinder wall and detects the ferrous piston in its end position.
- Sensing range: 1.8 mm, ferrous metals, flush mountable
- Pressure: rated 500 bar, peak 1000 bar, burst min. 2000 bar
- Output: PNP, NO, 200 mA, switching frequency 1000 Hz
- Supply: 10...36 VDC, consumption < 23 mA; short-circuit (pulsed), overload and reverse polarity protection
- Housing: M12 x 1 full-metal stainless steel, FKM O-ring, PTFE support ring, length 60 mm, tightening torque < 15 Nm
- Environment: IP65 / IP66 / IP68 / IP69K, operating temperature -25...+120 °C
- Connection: M12 connector, A-coded, 4-pin
Used for end-position detection of the piston in hydraulic cylinders on mobile and industrial machines, so no external limit switch or cam is needed.
UL approved. Vibration to EN 60068-2-6 (20 g, 10...3000 Hz), shock to EN 60068-2-27 (100 g, 11 ms). MTTF 658 years.
