DBI10U-M30-AP4X2 is a Turck inductive rotation speed monitor in an M30 chrome-plated brass housing. It counts the pulses from metal targets or teeth on a shaft, compares the speed with a setpoint and switches its PNP output when the speed crosses it.
- Monitoring range: 3...3000 rpm (0.05...50 Hz), setpoint adjusted with a potentiometer
- Sensing distance: 10 mm, flush mounting; secured operating distance ≤ 0.81 × Sn
- Output: PNP, NO, 3-wire; up to 200 mA
- Supply: 10...65 VDC, no-load current 20 mA, voltage drop ≤ 1.8 V
- Protection: short circuit, wire break and reverse polarity
- Housing: M30 x 1.5 thread, thread length 55 mm, chrome-plated brass, PBT sensing face, nut torque up to 75 Nm
- Environment: IP67, ambient temperature -30...+85 °C
- Connection: 2 m PVC cable (LifYY), 3 x 0.34 mm², Ø 5.2 mm
After power is applied, a fixed 5 s start-up bypass keeps the output closed while the drive runs up. The sensor is resistant to magnetic fields. A green LED shows power; the switching state LED is green, yellow or blue.
MTTF 874 years acc. to SN 29500 (40 °C).
