K50LGRYBWPQ8 is a Banner K50L series 50 mm dome indicator with five colours - green, red, yellow, blue and white - in one encapsulated polycarbonate housing. Each colour has its own PNP input, so one indicator can show five machine states.

• Colours: green, red, yellow, blue, white, one colour on at a time
• Inputs: PNP, one per colour, response under 250 ms
• Supply: 18-30 V DC, up to 50 mA per colour
• Housing: Ø50 x 69 mm, polycarbonate, encapsulated, M30x1.5 base mount
• Environment: IP67, -40...+50 °C
• Connection: integral M12 male connector, 8-pin

The indicator connects through a separately ordered 8-pin M12 female cordset. LED service life 50,000 h (L70); MTTF 249 years. UL and CE approved.

K50PSLRGB7Q is a Banner K50 Pro Select series 50 mm programmable RGB dome indicator with seven default colors. Colors, animations and input logic are reprogrammed with Banner Pro Editor software.

• Colors: green, red, yellow, blue, white, cyan, magenta (default)
• Inputs: bimodal PNP/NPN; gray wire - 1.5 Hz flash; response time 250 ms
• Configuration: Pro Editor, Discrete Control (up to 15 states) and Pulse Control (up to 16 states by frequency on the white wire)
• Supply: 10...30 V DC, 220 mA at 10 V, 115 mA at 24 V
• Housing: polycarbonate, M30x1.5 threaded base, 50 x 69 mm
• Environment: IP66, IP67, IP69K, UL 4X and 13, -40...+50 °C
• Connection: integral 5-pin M12 male connector

Changing the settings requires a Pro Converter cable to connect to a PC. The Pro ID function takes the code of another K50 model and applies its colors and input logic, so one indicator can stand in for several standard K50 models.

CE and UL compliant. Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (30 G, 11 ms).

TL50BGYRAOSQ is a Banner TL50 series 50 mm LED tower light with 4 colour segments: blue, green, yellow, red, from the bottom up, topped by a sealed omnidirectional audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: blue 470 nm, green 528 nm, yellow 590 nm, red 625 nm
• Audible: continuous tone, 2.1 kHz, up to 99 dB at 1 m
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 45 mA
• Housing: Ø50 x 278.7 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
• Environment: IP67, -20...+50 °C
• Connection: integral M12 male connector, 8-pin

The tower connects through a separately ordered 8-pin M12 female cordset. The omnidirectional alarm sounds at a fixed 99 dB with no intensity adjustment.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

SG-TL70B-A is a Banner TL70B series 70 mm audible module that twist-locks on top of a TL70B modular tower light. It sounds when the base input for its position is switched.

• Audible: 2.7 kHz, up to 104 dB at 1 m, 13 dB adjustment with the rotating baffle
• Mode: continuous or pulsed at 1.5 Hz / 3 Hz, set with DIP switches in the base
• Supply: 12...30 V DC, 33 mA at 12 V, 17 mA at 24 V
• Housing: polycarbonate, Ø70 x 72 mm
• Environment: IP65, IP66, -40...+50 °C

Works only with TL70B series bases and always sits at the top of the tower.

Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (15 G, 11 ms).

SA-M30TE12 is a Banner tapered adapter that joins a light with a 30 mm base to the top of a ½" stand-off pipe and covers the joint. It is typically used with CL50 column lights, TL50 tower lights and K50 indicators.

• Connection: 30 mm light base to ½" NPSM/DN15 pipe
• Material: black acetal
• Included: mounting hardware

SOP-E12-150SS is a Banner 150 mm stand-off pipe in 304 stainless steel for mounting an indicator, tower light or sensor raised above the mounting surface.

• Length: 150 mm
• Thread: ½" NPT at both ends (NPSM/DN15 system)
• Material: 304 stainless steel

The lower end needs a mounting base and the upper end an adapter for the device base.

K50L2RGBKQ is a Banner K50 Pro series 50 mm RGB dome indicator controlled over IO-Link. Color, flashing, intensity and animations are set from the IO-Link master, so one indicator on one 4-pin cable can show many machine states.

• Colors: RGB, predefined and custom colors via IO-Link
• Animations: flashing, two-color flashing, strobe, half/half, half/half rotate
• Communication: IO-Link, input response time max. 30 ms
• Supply: 18...30 V DC, typical 115 mA at 24 V
• Housing: polycarbonate, M30x1.5 threaded base, Ø50 x 69 mm
• Environment: IP66, IP67, IP69K, UL 4X and 13, -40...+50 °C
• Connection: integral 4-pin M12 male connector

Requires an IO-Link master port; the IODD file is on the Banner website. The base is fixed with the included M30 nut, max. torque 4.5 N·m.

CE compliant. Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (30 G, 11 ms).

T18GRBP is a Banner EZ-LIGHT T18 series three-color indicator in a right-angle housing with an M18x1 threaded base. Green, red and blue each have their own input wire.

• Colors: green, red, blue
• Inputs: PNP, response time max. 1 ms
• Supply: 10...30 V DC, max. 25 mA per color
• Housing: yellow thermoplastic polyester, M18x1 thread, 41 x 30.1 x 32.4 mm
• Environment: IP67, -40...+50 °C
• Connection: 2 m cable, 4 wires

Supplied without original packaging.

Without packaging

!Without packaging!

K30 Series: 2-Color Touch Sensor; Latching Output

Voltage: 12-30 V dc; Housing: Polycarbonate; IP67 IP69K

Output: Bipolar (NO); Colors: Yellow - Not Activated, Red - Activated

5-pin M12 Integral QD

K30APT2FXRF2 is a Banner K30 FDA series 30 mm capacitive touch button in FDA-grade materials for food and washdown areas. It switches when touched with a bare or gloved hand, without mechanical force; the button stays dark with power applied and lights red when its input is active.

• Colour: red when the input is active, off with power only
• Input: PNP, response 300 ms
• Output: PNP, normally open, momentary, 150 mA max, response 150 ms
• Supply: 12-30 V DC, 55 mA max
• Housing: Ø30 x 41 mm, FDA-grade copolyester, grey, M22x1.5 base mount
• Environment: IP67, IP69K, -40...+50 °C
• Connection: 2 m PVC cable, 4 wires

The button is immune to false triggering by water spray, detergents and oils.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms). UL, CE and UKCA approved.

SMBAMS30RA is a Banner SMBAMS series right-angle bracket for sensors with a 30 mm housing. Its slots let the sensor be turned through more than 90°.

• Sensor hole: Ø31.0 mm
• Mounting: Ø6.5 mm hole and 26.8 × 7.0 mm slot
• Material: 2.6 mm (12-gauge) cold-rolled steel

CL50GRYPQ is a Banner CL50 series 50 mm LED column light with green, red and yellow segments. Each colour is switched by its own PNP input, one colour at a time.

• Colours: green 525 nm (72 lm), red 625 nm (38 lm), yellow 590 nm (30 lm)
• Inputs: PNP, one per colour, response 10 ms
• Supply: 18-30 V DC, up to 100 mA per colour
• Housing: Ø50 x 114.2 mm, ABS/polycarbonate, black, M30x1.5 base mount
• Environment: IP67, -40...+50 °C
• Connection: integral M12 male connector, 4-pin

The light connects through a separately ordered 4-pin M12 female cordset. UL and CE approved.

WLS15XDW0640DSQP is a Banner WLS15 series 640 mm daylight white strip light in a sealed polycarbonate shell with an aluminum frame. The same model runs on 12 V DC or 24 V DC.

• Light: daylight white 5000 K, 700 lm, lighted length 566.4 mm
• Supply: 12 or 24 V DC, typical 0.76 A at 12 V, 0.40 A at 24 V
• Dimming: PWM 25...100 %, up to 1000 Hz
• Housing: polycarbonate, aluminum frame, polyamide end caps, 640 x 30.6 x 15.5 mm
• Environment: IP66, IP67, -40...+60 °C
• Connection: 150 mm PVC cable with 4-pin M12 male connector, stand-alone (non-cascade) model

The light is fixed with M4 screws through the integral slots (max. 0.56 N·m) or with snap clips. The cable must not be exposed to a high-pressure jet.

CE compliant. Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (15 G, 11 ms).

K30APT2FGRYF2QP is a Banner K30 FDA series 30 mm capacitive touch button with a three-colour indicator, in FDA-grade materials for food and washdown areas. It switches when touched with a bare or gloved hand, without mechanical force, and the green, red and yellow light are controlled by separate PNP inputs.

• Colours: green, red, yellow; colour 3 overrides 1 and 2, colour 2 overrides 1
• Inputs: PNP, one per colour, response 300 ms
• Output: PNP, normally open, momentary, 150 mA max, response 150 ms
• Supply: 12-30 V DC, 55 mA max
• Housing: Ø30 x 41 mm, FDA-grade copolyester, grey, M22x1.5 base mount
• Environment: IP67, IP69K, -40...+50 °C
• Connection: 150 mm PVC cable with M12 male connector, 8-pin, stainless steel

The button is immune to false triggering by water spray, detergents and oils, and needs a separately ordered 8-pin M12 female cordset.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms). UL, CE and UKCA approved.

WLS15XDW0920DSQP is a Banner WLS15 series 920 mm daylight white strip light in a sealed polycarbonate shell with an aluminum frame. The same model runs on 12 V DC or 24 V DC.

• Light: daylight white 5000 K, 1050 lm, lighted length 846.4 mm
• Supply: 12 or 24 V DC, typical 1.14 A at 12 V, 0.60 A at 24 V
• Dimming: PWM 25...100 %, up to 1000 Hz
• Housing: polycarbonate, aluminum frame, polyamide end caps, 920 x 30.6 x 15.5 mm
• Environment: IP66, IP67, -40...+60 °C
• Connection: 150 mm PVC cable with 4-pin M12 male connector, stand-alone (non-cascade) model

The light is fixed with M4 screws through the integral slots (max. 0.56 N·m) or with snap clips. The cable must not be exposed to a high-pressure jet.

CE compliant. Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (15 G, 11 ms).

SOK-TL50-150A is a complete Banner elevated mounting kit that raises a TL50 tower light 150 mm above the surface. The pipe passes through a 30 mm drilled hole and the adapter on top gives a tapered transition to the light base.

• Fits: Banner TL50 tower lights
• Included: SA-M30TE12 adapter, SOP-E12-150A pipe, SA-E12M30 base cover
• Pipe: 150 mm, black anodised aluminium, ½" NPT

TL50GYRAQ is a Banner TL50 series 50 mm LED tower light with 3 colour segments: green, yellow, red, from the bottom up, topped by a audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: green 528 nm, yellow 590 nm, red 625 nm
• Audible: continuous tone, 2.7 kHz, up to 92 dB at 1 m, adjustable down to 62 dB
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 25 mA
• Housing: Ø50 x 200.8 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
• Environment: IP50, -20...+50 °C
• Connection: integral M12 male connector, 5-pin

The tower connects through a separately ordered 5-pin M12 female cordset. Audible intensity is adjusted by unscrewing the top cover by up to 1.5 turns.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

SA-F12 is a Banner flange base that fixes a ½" stand-off pipe to a flat surface. It is die-cast zinc, painted black.

• Fits: ½" NPSM/DN15 stand-off pipes
• Material: die-cast zinc, black paint
• Included: M5 mounting hardware and nitrile gasket

TL50HGYRAOS4Q is a Banner TL50H series high-brightness 50 mm tower light with green, yellow and red segments and an omni-directional sealed audible with a staccato tone. It comes assembled; each color and the audible have their own bimodal input.

• Colors (bottom to top): green 525 nm (60 lm), yellow 590 nm (23 lm), red 625 nm (32 lm)
• Audible: omni-directional sealed, staccato, 2.1 kHz, 99 dB at 1 m, not adjustable
• Input: bimodal PNP/NPN, response 10 ms
• Supply: 18...30 V DC or 24 V AC; per color 100 mA at 18 V, audible 45 mA
• Housing: ABS base and covers, polycarbonate segments, M30x1.5 thread; IP67, UL Type 4X Indoor and 13
• Connection: integral 5-pin M12 male connector

Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (30 G, 11 ms).

WLS27CW285DSQ is a Banner WLS27 series 285 mm cool white strip light in an FDA-grade copolyester shell rated up to IP69K. It is a cascade model with a male M12 connector at one end and a female one at the other.

• Light: cool white 6500 K, 800 lm, CRI 85
• Dimming: black wire to supply - 50 % intensity, open or to common - 100 %
• Supply: 12...30 V DC, typical 0.30 A at 24 V, max. 0.8 A
• Housing: anodized aluminum frame, diffused FDA copolyester shell, Ø27 x 360 mm, brackets included
• Environment: IP66, IP67, IP69K, -40...+70 °C, the light dims above +50 °C
• Connection: integral 4-pin M12 male connector

In a cascade at 100 % intensity the total length must not exceed 1.4 m at 12 V DC, 3.0 m at 24 V DC and 3.1 m at 30 V DC; at 50 % intensity the lengths double. Clean only with mild detergent and warm water.

CE compliant. Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (15 G, 11 ms).

Supplied without original packaging.

WLS28-2CW145XPBQ is a Banner WLS28-2 series 145 mm cool white work light with a High/Low/Off switch on the housing. It is a cascade model: further lights connect to it with double-ended cordsets, and the switch controls them too.

• Light: cool white 6500 K, 400 lm, CRI 85
• Switch: II - 100 %, I - 50 %, 0 - off
• Supply: 12...30 V DC, typical 0.15 A at 24 V
• Housing: anodized aluminum, clear polycarbonate window, 224 x 28 x 25 mm, two swivel brackets included
• Environment: IP50, -40...+70 °C, light output decreases above +50 °C
• Connection: integral 4-pin M12 male connector

In a cascade at 100 % intensity the total light length must not exceed 1.4 m at 12 V DC and 3.0 m at 24 V DC; at 50 % intensity the lengths double. LED lifetime L70 - 75,000 hours.

CE compliant. Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (15 G, 11 ms).

SOP-E12-300SS is a Banner 300 mm stand-off pipe in 304 stainless steel for mounting an indicator, tower light or sensor raised above the mounting surface.

• Length: 300 mm
• Thread: ½" NPT at both ends (NPSM/DN15 system)
• Material: 304 stainless steel

The lower end needs a mounting base and the upper end an adapter for the device base.

The Banner SD50 Wireless Communication Kit enables fast, clear messaging across industrial facilities without complex wiring. This starter kit includes one DXMR90 controller, one R70SR radio, and one SD50 display. Additional SD50 displays can be added to expand the system to multiple locations.

DXMR90-X1E Industrial Controller - Network hub supporting EtherNet/IP, Modbus TCP, Modbus RTU, PROFINET, and MQTT/Sparkplug B protocols. IP67/IP68 rated with dual M12 Ethernet ports. 12-30V DC power supply.

R70SR2MQ Serial Data Radio - 2.4 GHz multihop wireless radio with 65mW output. RS-485 interface, internal antenna, IP65 rated. Supports point-to-point, point-to-multipoint, star, and tree topologies.

SD50P300WSR2QP Wireless Status Display - 300mm white LED display (8×96 pixels) with RGB indicators. Configure wirelessly via Pro Editor software without coding. IP65 polycarbonate housing. 12-30V DC.

Configuration Options:

• Discrete models: Configure via Pro Editor - define text, colors, animations without coding or PLC programming
• IO-Link models: Integrate with IO-Link networks for remote diagnostics and standardized connectivity
• Wireless models: Configure through Modbus registers, update messages as conditions change

Expandable System: Add multiple SD50 displays to communicate across different zones, production lines, or departments using the same controller and radio infrastructure.

K30LGXXPQ is a single-colour green LED indicator from the Banner EZ-LIGHT K30L series. It is driven directly from the discrete PNP output of a 3-wire or 4-wire sensor or from a PLC output, without a relay and without an amplifier.

• Indication: single colour - green, the whole dome emits light
• Input: PNP, on and off response time up to 1 ms
• Supply: 10...30 V DC, up to 25 mA
• Housing: polycarbonate base with M22x1.5 thread, translucent polycarbonate dome, Ø30 mm, height 58 mm, fully encapsulated electronics
• Environment: IP67 and IP69K per DIN 40050-9, -40...+50 °C
• Connection: integral M12 male connector, 4-pin

The indicator mounts in a 22 mm hole and shows machine or process status at the workplace - at a conveyor, a packaging machine station or a control desk. The QD version needs a separately ordered M12 cordset, as one is not included.

CE compliant, K30L models are cULus Listed.

TL50BGYRAQ is a Banner TL50 series 50 mm LED tower light with 4 colour segments: blue, green, yellow, red, from the bottom up, topped by a audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: blue 470 nm, green 528 nm, yellow 590 nm, red 625 nm
• Audible: continuous tone, 2.7 kHz, up to 92 dB at 1 m, adjustable down to 62 dB
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 25 mA
• Housing: Ø50 x 241.5 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
• Environment: IP50, -20...+50 °C
• Connection: integral M12 male connector, 8-pin

The tower connects through a separately ordered 8-pin M12 female cordset. Audible intensity is adjusted by unscrewing the top cover by up to 1.5 turns.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

WLS28-2XW285SQ is a Banner WLS28-2 series LED strip light with a 285 mm lit length, in a clear anodised aluminium housing sealed for washdown. The black wire selects full or 50 % light output.

• Light: cool white 6500 K, 800 lm, CRI 85
• Light level: black wire to +V gives 50 %, floating or to common gives 100 %
• Supply: 12-30 V DC
• Housing: 326 x 28 x 20.9 mm, anodised aluminium, polycarbonate window, two swivel brackets included
• Environment: IP65, IP67, IP69K, -40...+70 °C
• Connection: integral M12 male connector, 4-pin

Light output falls above 50 °C, to about 65 % at 60 °C. LED service life 75,000 h (L70). UL, CE and UKCA approved.

LMBE12RA45 is a Banner right-angle bracket for mounting an indicator light on a stand-off pipe with a 1/2-14 NPSM nut. The centre of the nut sits 45 mm from the wall.

• Fits: stand-off pipe with 1/2-14 NPSM nut
• Offset: 45 mm from the mounting surface to the nut centre
• Mounting: 2x Ø11 mm holes, 35.0 mm hole centre spacing
• Material: zinc-plated steel

TL50GYRALSQ is a Banner TL50 series 50 mm LED tower light with 3 colour segments: green, yellow, red, from the bottom up, topped by a sealed audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: green 528 nm, yellow 590 nm, red 625 nm
• Audible: continuous tone, 2.9 kHz, up to 94 dB at 1 m, adjustable down to 74 dB
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 35 mA
• Housing: Ø50 x 223.9 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
• Environment: IP67, -20...+50 °C
• Connection: integral M12 male connector, 5-pin

The tower connects through a separately ordered 5-pin M12 female cordset. Audible intensity is adjusted by rotating the front cover of the alarm.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

K50GRBPQ is a Banner K50 series 50 mm indicator that lights in three colours from one dome: green, red, blue. Each colour has its own PNP input, and a higher colour overrides a lower one, so a single indicator can show three machine states.

• Colours: green (pin 4), red (pin 2), blue (pin 1); colour 3 overrides 1 and 2
• Input: PNP, response 1 ms
• Supply: 24 V DC ±10 %, max. 55 mA per colour
• Housing: Ø 50 mm, polycarbonate base and dome, M30x1.5 thread, nut included
• Environment: IP66, IP67, IP69K, UL Type 4X and 13, -40...+50 °C
• Connection: integral M12 male connector, 4-pin; cordset ordered separately

Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (30 g, 11 ms).

WLS28-2XW285XQ is a Banner WLS28-2 series LED strip light with a 285 mm lit length, in a clear anodised aluminium housing. The black wire selects full or 50 % light output.

• Light: cool white 6500 K, 800 lm, CRI 85
• Light level: black wire to +V gives 50 %, floating or to common gives 100 %
• Supply: 12-30 V DC
• Housing: 327 x 28 x 20.9 mm, anodised aluminium, polycarbonate window, two swivel brackets included
• Environment: IP50, -40...+70 °C
• Connection: integral M12 male connector, 4-pin

Light output falls above 50 °C, to about 65 % at 60 °C. LED service life 75,000 h (L70). UL, CE and UKCA approved.

LMBLC25T is a Banner stainless steel clip bracket for LC25 lights. The light snaps into the clip, which is screwed to the surface through a clearance hole for M5 hardware.

• Fits: Banner LC25
• Material: stainless steel
• Mounting: Ø 5.2 mm clearance hole for M5 hardware
• Included: 1 clip bracket and 2 plastic spacers

K50GRYPQ is a Banner K50 series 50 mm indicator that lights in three colours from one dome: green, red, yellow. Each colour has its own PNP input, and a higher colour overrides a lower one, so a single indicator can show three machine states.

• Colours: green (pin 4), red (pin 2), yellow (pin 1); colour 3 overrides 1 and 2
• Input: PNP, response 1 ms
• Supply: 24 V DC ±10 %, max. 55 mA per colour
• Housing: Ø 50 mm, polycarbonate base and dome, M30x1.5 thread, nut included
• Environment: IP66, IP67, IP69K, UL Type 4X and 13, -40...+50 °C
• Connection: integral M12 male connector, 4-pin; cordset ordered separately

Vibration per IEC 60068-2-6, shock per IEC 60068-2-27 (30 g, 11 ms).

LMBWLS15 is a set of Banner stainless steel clip brackets for WLS15 LED light strips. The strip snaps into the clips, which are screwed to the surface through clearance holes for M5 hardware.

• Fits: Banner WLS15
• Material: stainless steel
• Mounting: Ø 5.2 mm clearance hole for M5 hardware
• Included: 3 clip brackets and 2 plastic spacers

TL50GRALSQ is a Banner TL50 series 50 mm LED tower light with 2 colour segments: green, red, from the bottom up, topped by a sealed audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: green 528 nm, red 625 nm
• Audible: continuous tone, 2.9 kHz, up to 94 dB at 1 m, adjustable down to 74 dB
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 35 mA
• Housing: Ø50 x 183.2 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
• Environment: IP67, -20...+50 °C
• Connection: integral M12 male connector, 4-pin

The tower connects through a separately ordered 4-pin M12 female cordset. Audible intensity is adjusted by rotating the front cover of the alarm.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

SOKTL150R4 is a foldable stand for Banner TL50 tower lights. It locks upright or folds down to 90°: loosen the control screw three turns, fold, then tighten the screw again.

• Material: black polycarbonate
• Base: Ø90 mm, 4 mounting holes Ø5.5 mm
• Tower light connection: M30 × 1.5 thread
• Included: mounting hardware

Once folded, the cable can be fixed in the groove on the unit with a cable tie.

CL50GRYAPQ is a Banner CL50 series 50 mm LED column light with green, red and yellow segments and an audible alarm. Each colour is switched by its own PNP input, one colour at a time.

• Colours: green 525 nm (72 lm), red 625 nm (38 lm), yellow 590 nm (30 lm)
• Audible: continuous tone, 2.7 kHz, up to 92 dB at 1 m, adjustable down to 62 dB
• Inputs: PNP, one per colour, response 10 ms
• Supply: 18-30 V DC, up to 100 mA per colour, alarm 25 mA
• Housing: Ø50 x 145.3 mm, ABS/polycarbonate, black, M30x1.5 base mount
• Environment: IP50, -20...+50 °C
• Connection: integral M12 male connector, 5-pin

The light connects through a separately ordered 5-pin M12 female cordset. UL and CE approved.

WL50SWSSL11Q is a Banner WL50S series 50 mm LED spot light with an ±11° lens, in a 316 stainless steel housing sealed with Viton for washdown and chemical cleaning. Three high-intensity LEDs give 1365 lx at 1 m.

• Light: white 5000-8300 K, 285 lm; 5460 lx at 0.5 m, 1365 lx at 1 m
• Supply: 12-30 V DC, 400 mA max
• Housing: Ø56 x 71.1 mm, 316 stainless steel, polycarbonate window, M30x1.5 base mount, FDA-grade silicone gasket
• Environment: IP67, IP69K, -20...+50 °C
• Connection: integral M12 male connector, 5-pin; only 2 wires used

The light connects with a 4-pin or 5-pin M12 female cordset, ordered separately. LED service life 50,000 h. UL, CE and UKCA approved.

TL50BGYRALSQ is a Banner TL50 series 50 mm LED tower light with 4 colour segments: blue, green, yellow, red, from the bottom up, topped by a sealed audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: blue 470 nm, green 528 nm, yellow 590 nm, red 625 nm
• Audible: continuous tone, 2.9 kHz, up to 94 dB at 1 m, adjustable down to 74 dB
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 35 mA
• Housing: Ø50 x 264.6 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
• Environment: IP67, -20...+50 °C
• Connection: integral M12 male connector, 8-pin

The tower connects through a separately ordered 8-pin M12 female cordset. Audible intensity is adjusted by rotating the front cover of the alarm.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

S15LGYPQ is a Banner S15L series two-color status indicator that screws in between a sensor and its cordset. Green is on while the sensor has power, and yellow replaces it when the sensor's PNP output is active.

• Colors: green - power, yellow - sensor output active
• Input: PNP, pin 4 (black wire)
• Supply: 10...30 V DC, up to 15 mA
• Housing: Ø15 × 57.8 mm, nickel-plated brass coupling, translucent white PVC
• Environment: IP65, IP67, IP68, -40...+40 °C
• Connection: integral 4-pin M12 male and female

The indicator is fitted where the sensor's own LEDs cannot be seen, for example inside a machine or behind a guard. All four pins pass straight through from male to female, so an IO-Link sensor can also be connected through it. The input responds to PNP signals only.

Meets CE, UKCA and UL/CSA requirements, enclosure rating UL Type 1.

SA-FFB12 is a Banner foldable base for ½" stand-off pipes. The pipe can be tilted through 110°, so a raised light can be folded down for service or for clearance.

• Fits: ½" NPSM/DN15 stand-off pipes
• Movement: 110° rotation
• Material: black polycarbonate, stainless steel hardware

TL50BGYRQ is a Banner TL50 series 50 mm LED tower light with 4 colour segments: blue, green, yellow, red, from the bottom up. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: blue 465 nm, green 525 nm, yellow 590 nm, red 625 nm
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC, up to 26 mA per colour
• Housing: Ø50 x 219.1 mm, polycarbonate housing, black, M30x1.5 base mount
• Environment: IP67, -40...+50 °C
• Connection: integral M12 male connector, 5-pin

The tower connects through a separately ordered 5-pin M12 female cordset.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

TL50RALSQ is a Banner TL50 series 50 mm LED tower light with 1 colour segment: red, from the bottom up, topped by a sealed audible alarm. Each colour has its own input wire and the inputs are bimodal, so the tower can be driven from either PNP or NPN controller outputs.

• Colours: red 625 nm
• Audible: continuous tone, 2.9 kHz, up to 94 dB at 1 m, adjustable down to 74 dB
• Inputs: bimodal (PNP or NPN), one per colour, response 10 ms
• Supply: 18-30 V DC or 24 V AC 50/60 Hz, up to 45 mA per colour, alarm 35 mA
• Housing: Ø50 x 142.5 mm, ABS base and covers, polycarbonate light segments, black, M30x1.5 base mount
• Environment: IP67, -20...+50 °C
• Connection: integral M12 male connector, 4-pin

The tower connects through a separately ordered 4-pin M12 female cordset. Audible intensity is adjusted by rotating the front cover of the alarm.

Vibration tested to IEC 60068-2-6, shock to IEC 60068-2-27 (30 g, 11 ms).

S100PTVD2WAD2Q is a Banner S100 Pro series touch operator display that combines status indication, text and operator input in a single M30 threaded housing. This version works without an industrial network: the PLC switches states through discrete inputs, while text, colours and animations are loaded into the unit beforehand with Banner Pro Editor.

• Display: two-row white dot-matrix display, 13 characters per line, 16 RGB LED ring and audible alert
• Control: 5 capacitive touch zones with vibration feedback, response time max. 300 ms
• Control signals: discrete inputs, output max. 150 mA
• Supply: 12-30 V DC
• Housing: black polycarbonate with tinted window, Ø100 mm, M30x1.5 threaded base, IP66/IP69K, -40...+50°C
• Connection: integral M12 male connector, 5-pin

The display mounts in a Ø30 mm hole at the machine station - pick-to-light positions, takt timer, counter and step confirmation. The configuration is loaded with Pro Editor before installation, so changing text or colours means disconnecting the unit and connecting it to a PC.

CE marked, compliant with FCC Part 15 Class B and ICES-003(B), housing rated UL Type 4X.

S100PTVD2WAKQ is a Banner S100 Pro series touch operator display that combines status indication, text and operator input in a single M30 threaded housing. Over IO-Link the controller changes text, colours and the state of each touch zone at runtime, so one unit serves several machine modes without reconfiguration.

• Display: two-row white dot-matrix display, 13 characters per line, 16 RGB LED ring and audible alert
• Control: 5 capacitive touch zones with vibration feedback, response time max. 300 ms
• Communication: IO-Link
• Supply: 18-30 V DC, 280 mA at 18 V DC, 210 mA at 24 V DC
• Housing: black polycarbonate with tinted window, Ø100 mm, M30x1.5 threaded base, IP66/IP69K, -40...+50°C
• Connection: integral M12 male connector, 4-pin

The display mounts in a Ø30 mm hole at the machine station - pick-to-light positions, takt timer, counter and step confirmation. Note that this version starts at 18 V DC, not 12 V DC as the other S100 Pro versions.

CE marked, compliant with FCC Part 15 Class B and ICES-003(B), housing rated UL Type 4X.

S100PTVD2WASQ is a Banner S100 Pro series touch operator display that combines status indication, text and operator input in a single M30 threaded housing. The controller changes text, colours and the meaning of each touch zone at runtime over Modbus RTU, so one unit serves several machine modes without reconfiguration.

• Display: two-row white dot-matrix display, 13 characters per line, 16 RGB LED ring and audible alert
• Control: 5 capacitive touch zones with vibration feedback, response time max. 300 ms
• Communication: Modbus RTU over RS-485, 9600, 19200 and 38400 bit/s
• Supply: 12-30 V DC, 415 mA at 12 V DC, 210 mA at 24 V DC
• Housing: black polycarbonate with tinted window, Ø100 mm, M30x1.5 threaded base, IP66/IP69K, -40...+50°C
• Connection: integral M12 male connector, 4-pin

The display mounts in a Ø30 mm hole at the machine station - pick-to-light positions, takt timer, counter and step confirmation. Prepared modes run without programming, while Modbus registers let the PLC drive each row, colour and the audible alert separately.

CE marked, compliant with FCC Part 15 Class B and ICES-003(B), housing rated UL Type 4X.

LMB1822FM is an aluminium adapter for mounting the Banner S18L indicator, which has an M18 × 1 thread, in a standard 22 mm hole.

• Fits: M18 × 1 thread into a 22 mm hole (22 × 1.5 mm)
• Material: aluminium, black
• Mounting: flush
• Included: adapter, nut, gasket

K50LGRASYPQ is a Banner K50L series 50 mm dome indicator with green, red and yellow light and a sealed audible alarm, in an encapsulated polycarbonate housing for washdown areas. Each colour and the alarm have their own PNP input.

• Colours: green, red, yellow, one colour on at a time
• Audible: continuous tone, 2.9 kHz, 65 dB at 1 m, fixed
• Inputs: PNP; indicator response 1 ms, audible 10 ms
• Supply: 12-30 V DC, up to 35 mA per colour at 30 V, alarm 35 mA
• Housing: Ø50 x 73 mm, polycarbonate, encapsulated, M30x1.5 base mount
• Environment: IP67, IP69K, NEMA 4X, -20...+50 °C
• Connection: integral M12 male connector, 5-pin

The 65 dB alarm is fixed in level; the indicator connects through a separately ordered 5-pin M12 female cordset.

Vibration tested to MIL-STD-202F, method 201A; shock to IEC 60947-5-2 (30 g, 11 ms). UL and CE approved.

S15LGYPM8Q4 is a Banner S15L series two-color status indicator that screws in between a sensor with an M8 connector and its cordset. Green is on while the sensor has power, and yellow replaces it when the sensor's PNP output is active.

• Colors: green - power, yellow - sensor output active
• Input: PNP
• Supply: 10...30 V DC, up to 15 mA
• Housing: Ø15 × 58 mm
• Environment: IP66, IP67, -40...+70 °C
• Connection: integral 4-pin M8 male and female

The indicator is fitted where the sensor's own LEDs cannot be seen, for example inside a machine or behind a guard. The input responds to PNP signals only.