BI10-M30-ADZ3X is a Turck inductive sensor in an M30 chrome-plated brass housing with a 2-wire normally open (NO) output. The sensor runs on both AC and DC supply. A red LED shows the switching state.
- Sensing distance: 10 mm, flush mounting; secured operating distance ≤ 0.81 × Sn
- Output: 2-wire, NO; up to 400 mA AC / 300 mA DC, minimum load current ≥ 3 mA, surge current ≤ 8 A (≤ 10 ms, max. 5 Hz); switching frequency 20 Hz
- Supply: 20...250 VAC (50...60 Hz) or 10...300 VDC; voltage drop ≤ 6 V, residual current ≤ 1.7 mA
- Protection: short circuit (latching), reverse polarity and wire break
- Housing: M30 x 1.5 thread, thread length 55 mm, chrome-plated brass, PA12-GF30 sensing face, nut torque up to 75 Nm
- Environment: IP67, ambient temperature -25...+70 °C
- Connection: 2 m PVC cable (LifYY), 3 x 0.5 mm², Ø 5.2 mm
Correction factors for other target metals (St37 steel = 1): aluminium 0.3, brass 0.4, stainless steel 0.7.
MTTF 2283 years acc. to SN 29500 (40 °C).
