BI10-EM30-AP6/S907 is a Turck inductive sensor in an M30 x 1.5 stainless steel housing with a 10 mm switching distance for flush mounting. The S907 version with FEP-jacketed cable is rated for ambient temperatures up to +160 °C.
- Temperature: ambient up to +160 °C (special version S907), range -25...+160 °C; IP68, IP69K
- Sensing distance: 10 mm, flush mounting; secured operating distance ≤ 0.81 × Sn
- Output: PNP, NO; up to 200 mA; switching frequency 200 Hz
- Supply: 10...30 VDC, 3-wire, no-load current 15 mA, voltage drop ≤ 1.8 V
- Protection: short circuit, wire break and reverse polarity
- Housing: M30 x 1.5 thread, stainless steel 1.4571 (AISI 316Ti), PEEK sensing face, thread length 65 mm, PTFE end cap, nut torque up to 40 Nm; front cap withstands ≤ 10 bar
- Connection: 2 m FEP cable (PTFE), 3 x 0.34 mm², Ø 3.7 mm
The permissible output current falls at higher ambient temperatures - see the derating curve in the datasheet.
Correction factors for other target metals (St37 steel = 1): aluminium 0.3, brass 0.4, stainless steel 0.7.
