Process Temperature: max. 80°C (176°F) 
Process Overpressure: max. 3 bar (43.51 psi) 
Electronic Module: 2-wire 4-20 mA, HART 
Process Connection: Thread G 1 1/2" DIN ISO 228-1 
Measuring Range: max. 15 m (49.2 ft) 
Cable and Line Entry: M20 x 1.5 cable gland Plug on 
Display: With display (transparent lid)

Housing: PVDF IP66/IP68, Type 6P 
Certificates: ATEX, IEC-Ex, cFMus, UKEX, INMETRO, KC, FCC, IC (Gas, dust explosion protection), 
WHG Measuring range: up to 30 m 
Measurement accuracy: ±2 mm 
Pressure range: -1 to +3 bar (-14.5 to +43.5 psi) 
Supply voltage: 12-35 V DC 
Process connection: NPT 1", R 1", G 1" or mounting flange (> DN 80 / 3") 
Process temperature: -40°C to +80°C (-40°F to +176°F) 
Signal output: 4...20 mA, 2-wire 
Communication: HART 
Sensitivity: DK value ≥ 1.1 
Sensor material: PVDF, FDA registered 
Frequency: 80 GHz FMCW

Process Temperature: max. +150°C (302°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 24 V DC / 22..230 V AC universal voltage Process Connection: Thread G 1½", DIN 228 Material of Process Connection: Stainless steel Length of Extension L: Special length, 800 mm Material of Extension L: Stainless steel Measuring Vane: Boot-shaped, 40 x 98 mm (1.57 x 3.86") stainless steel, suitable for 1½" socket

Process Temperature: max. +80°C (176°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 230 V AC, 50-60 Hz, 4 VA Process Connection: Flange 150 x 150, 4 x 18 LK170 Material of Process Connection: Aluminium Length of Extension L: 150 mm (5.91") Material of Extension L: Stainless steel Measuring Vane: Boot-shaped, 40 x 98 mm (1.57 x 3.86") stainless steel, suitable for 1½" socket Local Certificates: Without Bearing at Tube End: Without (Note for RN 3004: Bearing at tube end is factory mounted) Extension / Flange Welded: Without

Process Temperature: max. +80°C (176°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 230 V AC, 50-60 Hz, 4 VA Process Connection: Flange 150 x 150, 4 x 18 LK170 Material of Process Connection: Aluminium Length of Extension L: 150 mm (5.91") Material of Extension L: Stainless steel Measuring Vane: Boot-shaped, 40 x 98 mm (1.57 x 3.86") stainless steel, suitable for 1½" socket Local Certificates: Without Bearing at Tube End: Without (Note for RN 3004: Bearing at tube end is factory mounted) Extension / Flange Welded: Without

Power Supply: 230 V AC, 50-60 Hz, 4 VA 
Process Connection: Thread G 1", DIN 228 
Material of Process Connection: Plastic PA6 
Measuring Vane: Universal vane, 27 x 150 mm (1.06 x 5.91") plastic
Length of Extension L: Standard (for material plastic only)

Process Temperature: max. +250°C (482°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 230 V AC, 50-60 Hz, 4 VA Process Connection: Thread G 1½", DIN 228 Material of Process Connection: Stainless steel Length of Extension L: Special length 400 mm Material of Extension L: Stainless steel Measuring Vane: Hinged vane, 98 x 200 mm (3.86 x 7.87"), double-sided (L = 10 mm [0.39"] longer) Local Certificates: Without Bearing at Tube End: Without (Note: For RN 3004, bearing at tube end is factory mounted) Extension / Flange Welded: Without

Process Temperature: max. +80°C (176°F) Process Overpressure: max. 0.8 bar (11.60 psi) Power Supply: 230 V AC, 50-60 Hz, 4 VA Process Connection: Flange 150 x 150, 4 x 18 LK170 Material of Process Connection: Aluminium Length of Extension L: 150 mm (5.91") Material of Extension L: Stainless steel Measuring Vane: Boot-shaped, 40 x 98 mm (1.57 x 3.86") stainless steel, suitable for 1½" socket Local Certificates: Without Bearing at Tube End: Without (Note for RN 3004: Bearing at tube end is factory mounted) Extension / Flange Welded: Without