CMVT-M8TA1X-LI225-H1141 is a stainless steel vibration sensor with an M8 screw-in thread that measures the velocity RMS value over one axis and outputs it as a 4...20 mA signal, where 20 mA corresponds to 25 mm/s RMS. It is intended for rotating machine parts where rising vibration indicates bearing wear or imbalance; the sensor screws into the bearing housing along the axis where the vibration is expected.
- Measuring range: velocity 0...25 mm/s RMS, one axis, 23.6 kHz sampling
- Accuracy: ≤ ±0.5 % @ 159 Hz
- Outputs: 4...20 mA, load resistance ≤ 0.5 kΩ
- Supply: 18...30 VDC, consumption < 100 mA
- Housing: stainless steel, M8 screw-in thread, 72.5 x 23.8 mm
- Environment: IP66/IP67, operating temperature -40...+80°C, shock 60 g (6 ms), vibration 20 g
- Connection: M12 x 1 connector, 4-pin
There is no IO-Link and nothing to configure - the sensor wires straight into a controller's analogue input, and the measuring span is fixed by the model chosen.
MTTF 164 years to SN 29500 (Ed. 99). Shock tested to EN 60068-2-27, vibration to EN 60068-2-6.
