DX80N2X6S-PM2 is the node of a Banner Sure Cross Performance PM2 pair, with four discrete and two 0-20 mA analog channels in each direction. Its I/O mapping to the PM2 gateway is selected in the gateway's LCD menu.

• Inputs and outputs: 4 discrete inputs, NPN/PNP selectable, 3 mA at 30 V DC; 4 PNP discrete outputs, 100 mA; 2 analog inputs 0-20 mA, 12-bit, ±0.2 % FS; 2 analog outputs 0-20 mA, 12-bit, ±0.1 % FS
• Radio: 2.4 GHz FHSS, 65 mW conducted, EIRP < 100 mW with the supplied antenna, RP-SMA antenna connector
• Configuration: DIP switches for NPN/PNP input type, mapping from the gateway menu
• Supply: 10...30 V DC (outside the USA 12...24 V DC ±10 %)
• Housing: polycarbonate, two 1/2" NPT cable entries, two buttons, 6-character LCD, 0.26 kg
• Environment: IP67, NEMA 6; -40...+85 °C (LCD -20...+80 °C), 95 % RH non-condensing

The node works only paired with a 2.4 GHz PM2 gateway, ordered separately. Discrete inputs report on change of state; analog inputs report every second or on a 1 % change.

CE and UKCA (2.4 GHz models), RED 2014/53/EU; FCC ID UE3SX243, IC 7044A-SX243.

DX80N2X1W0P0ZTA is a Banner Sure Cross DX80 Node with a built-in three-axis M-GAGE magnetometer. It detects vehicles and other large ferrous objects by the change they cause in the Earth's magnetic field and reports each change of state by radio to a DX80 Gateway.

• Sensing: internal 3-axis magnetometer, sample rate 250 ms, report on change of state
• Radio: 2.4 GHz ISM, FHSS, range up to 150 m line of sight (less when buried)
• Power: integrated lithium battery pack, up to 5 years
• Housing: ABS, fully potted and sealed, 0.14 kg
• Environment: IP67, NEMA 6, -40...+85 °C

The sensor learns the ambient magnetic background and keeps it in non-volatile memory, then signals when a vehicle occupies the monitored spot, for example a parking stall. It needs a Sure Cross DX80 2.4 GHz Gateway to receive the signal; the housing must not be opened, and the battery is not replaceable.

Radio Equipment Directive 2014/53/EU. Shock per IEC 60068-2-27 (30 g, 11 ms), vibration per IEC 60068-2-6.

DX80N2Q45THA NB is a Banner Sure Cross Q45 wireless node with a built-in temperature and relative humidity sensor, powered by its own lithium AA cells. It sends relative humidity, °C and °F to a DXM controller or DX80 Performance gateway, so no sensor or supply cable runs to the measuring point.

• Accuracy: temperature ±0.4 °C (0...+60 °C), ±0.6 °C (-40...0 °C), ±1.2 °C (+60...+85 °C); humidity ±2 % RH at 25 °C, ±3 % RH (0...70 °C, 10...90 % RH), ±7 % RH (0...70 °C, 0...10 % or 90...100 % RH)
• Measuring range: -40...+85 °C, 0...100 % RH; resolution 0.1 °C and 0.1 % RH
• Outputs: 2.4 GHz FHSS radio; registers 1-3 hold RH, °C and °F; default sensing interval 5 min
• Supply: 3.6 V lithium AA cells, not included (NB model)
• Housing: reinforced thermoplastic polyester, transparent Lexan cover, stainless steel hardware
• Environment: IP67, NEMA 6P; -40...+70 °C, 90 % RH at +50 °C non-condensing

Typical positions are refrigerators and chillers, warehouses, storage rooms, cleanrooms and incubators. The temperature is the register value divided by 20; humidity needs no scaling.

CE and UKCA (2.4 GHz models), RED 2014/53/EU; FCC ID UE3SX243, IC 7044A-SX243.