SI-MAGB2MM is the coded magnet for Banner SI-MAGB2 non-contact magnetic safety interlock switches. It is mounted on the moving guard, and the switch changes state when the magnet comes within its switching distance.

• Fits: SI-MAGB2SM and SI-MAGB2SMQD switches
• Switching distance: 3...14 mm
• Mounting: two Ø 4.3 mm holes
• Operating temperature: -25...+70 °C

The coding is low: any SI-MAGB2 magnet operates any SI-MAGB2 switch, so the magnet and switch should be fixed with tamper-resistant fasteners. Magnets from the older SI-MAG models without the B do not work with SI-MAGB switches.

SI-RF-A2 is the low-profile RFID actuator for Banner SI-RF non-contact safety switches. It carries a fixed safety code that the switch reads when the guard closes.

• Fits: all SI-RF switches (Low, High and Unique coded)
• Size: 36 x 18 mm
• Mounting: two Ø 4.3 mm holes

With a Low coded switch any actuator works. A High coded switch accepts only the last taught actuator (up to 12 teach-ins), and a Unique coded switch accepts only the one actuator taught at installation, so a replacement SI-RF-A2 has to be taught in on High models and cannot be used on Unique models without replacing the switch.

BST-08B is a TURCK PA6 mounting bracket for M8 threaded sensors. The built-in dead-stop fixes the sensor position in the bracket.

• Fits: M8 threaded barrel sensors
• Material: PA6
• Dimensions: 16 x 20 x 12 mm
• Design: with dead-stop