Between checks, the pond level is unknown. A hydrostatic sensor at the bottom and a display at the edge show the level continuously - even when nobody has looked in a week.
24/7
±1 cm
Measurement accuracy
1 day
Installation
The problem
Pond level: enough or not?
Measuring means going on-site
Inaccurate and irregular data
Measurement with a ruler is approximate. Once a week or less — if anyone remembers at all. Between measurements, the level can be critically low.No warning for low level
Solution
Continuous measurement, point control, and visual indication in one system
The display shows the current level
Baumer DFON display with a large digit screen is visible from several meters away — the operator sees the level immediately, without connecting or searching.
Hydrostatic sensor measures the level
Low level warning
Secure mounting in outdoor conditions
What it changes in daily life
Fewer trips, faster response
Low level warning
When the level drops below the norm, the display turns red. It is noticeable immediately - there is no need to wait for the next scheduled check.
The display shows the current level
The Baumer DFON display with a large digit screen is visible from several meters away - the operator sees the level immediately, without connecting or searching.
Secure mounting in outdoor conditions
A specially made stainless steel support keeps the sensor and display in a stable position — sun, rain, frost, and ice do not interfere
Questions and answers
Frequently asked questions
Installation on site takes one working day. From order to launch, it usually takes 1-2 weeks.
No - the basic version operates directly from the sensor 4-20 mA loop, no separate power is needed. If you choose a relay for further signal transmission, additional connection may be required - we clarify this based on the specific configuration.
Get a quote